Chapter 5: Setting up your TV
To create and assign a custom label:
1
2
3 Press Bb c to highlight Custom and press T. The software keyboard will appear.
1 | 1 | 2EditA | BCHCRTNa Canb cel2 | Send3 D EXITE F dExite f 3 | ||
4 | G H I g h i 4 | 5 | J K L j k l 5 | 6 | M N O m n o 6 | |
7 | P Q R S p q r s 7 | 8 | T U V t u v 8 | 9 | W X Y Z w x y z 9 | |
_ | Backspace | 0 | 0 |
| INPUT | Space |
100 |
| |||||
|
|
|
|
|
|
|
4 Repeatedly press the corresponding key on the remote control to highlight the desired character on the
5 The highlighted character is entered after you either press a different key, press c key, or after a
6
7 When finished, press T.
8 New labels will be added to the list in alphabetical order
and marked with an icon to indicate that they are custom. Highlight the new custom label and press Tto assign.
Assigned channel labels will be displayed in the banner, Channel Add/Delete, Channels Block, and Channel Browser.
To delete the custom label:
1 Open the Channel Labeling window.
2 Highlight the label to be deleted and press =.
3 Highlight Yes from the deletion confirmation window and press T.
Delete the selected custom label?
NoYes
4 Highlight Done and press Tto save changes, and go back to the Channel Labeling window.
Setting the HDMI™ audio mode
To set the HDMI audio mode:
1 From the Audio menu, highlight Audio Setup and press T.
2 Press B or b to select HDMI 1 Audio and then press C or c to select the HDMI 1 audio mode (Auto, Digital, or Analog). (Auto is the recommended mode.) See “Connecting an HDMI or DVI device to the HDMI input” (- page 16).
Audio Setup
PC Audio |
| No | |||
|
|
|
|
|
|
HDMI 1 Audio |
| Auto | |||
|
|
|
|
|
|
MTS |
| Stereo | |||
|
|
| |||
Language |
| English | |||
|
| ||||
Optical Output Format |
| Dolby Digital | |||
|
|
| |||
Dolby Digital |
| Compressed | |||
Dynamic Range Control |
| ||||
|
|
| |||
|
|
|
|
|
|
| Reset |
|
| Done |
|
|
|
|
|
|
|
Mode Description
When viewing the HDMI 1 input, if digital audio from the HDMI input is
Auto available, it will be output. If not, the TV will automatically detect and output analog audio from the PC Audio input.
When viewing the HDMI 1 input,
Digital digital audio from the HDMI input will be output.
When viewing the HDMI 1 input,
Analog analog audio from the PC Audio input will be output.
3 To save your settings, highlight Done and press T.
Note: Because the PC and HDMI 1 inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio is set to “No,” the HDMI 1 Audio setting changes to “Auto.” If PC Audio is set to “Yes,” the HDMI 1 Audio setting is set to “Digital” and is grayed out in the menu. (Also see item 4 on page 11 and “Setting the PC Audio” on page 50.)
32