Toshiba 37RV530U, 32RV530U, 52RV530U Using the Locks menu, Control feature, Entering the PIN code

Page 46

Chapter 6: Using the TV’s features

Selecting the optical audio output format

You can use this feature to select the optical audio output format when you connect a Dolby Digital decoder or other digital audio system to the DIGITAL AUDIO OUT terminal on the TV (see “Connecting a digital audio system” on page 18).

To select the optical audio output format:

1 From the Audio menu, highlight Audio Setup and press T.

2 In the Optical Output Format field, select either Dolby Digital or PCM, depending on your device.

3 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

Using the Dolby® Digital Dynamic Range

Control feature

This dynamic range control feature causes the ATSC dynamic range to be further compressed, allowing you to switch from digital to analog broadcasts at the same dynamic range.

To use the Dolby Digital Dynamic Range Control:

1 From the Audio menu, highlight Audio Setup and press T.

2 In the Dolby Digital Dynamic Range Control field, select Compressed. When Standard is selected, the audio is output with minimal compression.

3 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

Note:

•This item will be grayed out for NTSC signals, Video, ColorStream, HDMI, and PC inputs.

•The Dolby Digital Dynamic Range Control will function in relation to Optical Output Format (PCM mode).

Using the Locks menu

The Locks menu includes the Enable Rating Blocking, Edit Rating Limits, Channels Block, Input Lock, Control Panel Lock, Game Timer, and New PIN Code features. You can use these features after entering the correct PIN code.

Entering the PIN code

1 On the remote control or TV control panel, press Yand highlight the Locks menu icon.

Locks

Enable Rating Blocking

Off

 

 

Edit Rating Limits

 

 

 

Channels Block

 

 

 

Input Lock

Off

 

 

Control Panel Lock

Off

 

 

Game Timer

Off

 

 

New PIN Code

 

2 Press b, which displays the PIN code entry screen.

•The Lock System screen (below) appears if a PIN code has not been stored. Press the Channel Number

buttons to enter a new four-digit code, enter the code a second time to confirm, and press T.

Lock System

Please enter a 4 digit PIN code

Confirm PIN code

Cancel Done

•The Locks/Active screen appears if the PIN code is

already stored. Use the Number buttons to enter your four-digit code and press T.

If the wrong PIN code is entered, the message “Incorrect PIN code, please try again!” appears. Highlight Retry and press T. Enter the code again and press T.

When the correct PIN code is entered, the Locks menu opens.

If you cannot remember your PIN code

While the PIN code entering screen is displayed, press E four times within five seconds. The PIN code will be cleared and you can enter a new PIN code.

46

Page 45 Page 47
Image 46
Page 45 Page 47
Contents 32RV530U 37RV530U 42RV530U 46RV530U 52RV530U Tune Into Safety Safety PrecautionsIssue Dear CustomerAdditional Safety Precautions Important Safety InstructionsInstallation, Care, and Service InstallationService CareTo Display your LCD TV on the included Pedestal Stand To Display your LCD TV using a Wall BracketChoosing a location for your LCD TV Removing the Pedestal StandImportant notes about your LCD TV PartTrademark Information Contents Troubleshooting Features of your new TV IntroductionEffective range TV front and side panel controls and connectionsGreen and Yellow LEDs TV back panel connections Overview of cable types Connecting your TVAbout the connection illustrations To view basic and premium Cable channels To view the antenna or Cable signalYou will need To view the VCRTo view the VCR or view and record antenna channels To view antenna or Cable channelsTo view the DVD player To record a TV program while watching a DVDTo control the devices To connect the IR blaster cableIf you cannot locate the device’s infrared sensor To view the Hdmi device video Connecting an Hdmi or DVI device to the Hdmi inputTo connect an Hdmi device, you will need To connect a DVI device, you will needREGZA-LINK connection Before controlling the devicesConnecting an audio system To control the audioTo connect a PC to the PC in terminal on the TV Connecting a personal computer PCSignal To connect a PC to the Hdmi terminal on the TVInstalling the remote control batteries Using the remote controlPreparing the remote control for use If you have a Toshiba deviceLearning about the remote control VCR, set the Mode Select switch to AUX Using the remote control to control your other devicesTo use your TV remote control to operate a AUXRemote Control functional key chart AUX 1 VCRProgramming the remote control to control your other devices TV/VCR Combo Cable converter boxSatellite receiver DVD/VCR ComboHtib Main menu layout Setup/Installation menu layoutMenu layout and navigation IconNavigating the menu system ApplicationsInput Configuration, and press T Setting up your TVTo configure the ANT/CABLE input source Selecting the menu languageProgramming channels automatically Manually adding and deleting channels in the channel memoryLabeling channels To create and assign a custom label Setting the Hdmi audio modeTo set the Hdmi audio mode To delete the custom labelViewing the digital signal meter Setting the time zoneReset Factory Defaults Selecting the Power-On ModeViewing the system status Labeling the video input sources Using the TV’s featuresSelecting the video input source to view To select the video input source to viewTuning channels using Channel Browser Tuning channelsFavorites Browser Elements of the Channel Browser Tuning to a specific channel programmed or unprogrammed Setting the Channel Tuning ModeTuning to the next programmed channel Adding and clearing channels and inputs in the History ListTo select the picture size using the remote control Switching between two channels using Channel ReturnSwitching between two channels using SurfLock To select the picture size using the menusTheaterWide For letter box programs Picture Size NaturalTheaterWide For 43 format programs TheaterWide For letter box programs with subtitlesTo turn on the auto aspect ratio feature Using the auto aspect ratio featureTo set the scroll settings To turn off the auto aspect ratio featureSelecting the picture mode Using the Freeze featureAdjusting the picture Adjusting the picture quality Digital CC Settings Using the TheaterLock feature Using the closed caption mode Base closed captionsCC Selector Adjusting the audioUsing the digital audio selector Muting the soundTo turn off the StableSound feature Adjusting the audio qualityTo adjust the audio quality Selecting stereo/SAP broadcastsEntering the PIN code Using the Locks menuControl feature If you cannot remember your PIN codeBlocking TV programs and movies by rating V-Chip Press b to highlight Enable Rating BlockingChanging your PIN code To block and unblock TV programs and moviesBlocking channels Unlocking programs temporarilyUsing the GameTimer Using the input lock featureUsing the control panel lock feature To adjust the PC settings Using the PC settings featureSetting the PC Audio To set the PC AudioUsing REGZA-LINK Setting the sleep timerREGZA-LINK playback device HD DVD player, etc. control Other REGZA-LINK functions Volume and Mute controls of Audio ReceiverREGZA-LINK input source selection REGZA-LINK Player Control menu functionsTo set the REGZA-LINK Setup Using the Hdmi settings featureTo set the Hdmi Settings To display TV status information using Recall Understanding the auto power off featureUnderstanding the last mode memory feature To display TV status information using InfoUsing dynamic contrast Using the TV’s advanced featuresUsing the advanced picture settings features Using the static gamma featureUsing CableClear digital noise reduction Selecting the color temperatureUsing Mpeg noise reduction Using the Game Mode feature Using the ColorMaster featureUsing Color Palette Adjustment To adjust the settings Using the advanced audio settings featuresUsing the surround sound features OffTroubleshooting General troubleshootingClosed caption problems Remote control problemsChannel tuning problems Rating blocking V-Chip problemsLED indications Specifications AppendixAcceptable signal formats for PC in and Hdmi terminals Format Resolution Frequency Pixel Clock FrequencyLimited United States Warranty For LCD Televisions 26 and LargerLimited Canadian Warranty For Toshiba Brand Flat Panel TelevisionsDisclaimer and Limitation of Remedy Appendix Index FreezePage Page Page Page Page 08-01
Top Page Image Contents