Tecra 780CDM / 780DVD Disassembly Overview

Tecra 780CDM / 780DVD Disassembly Overview, (cont.)

CAUTION: When you remove the FL, be careful not to let any dust or other foreign matter contaminate the LCD panel. Any contamination can affect the performance of the unit.

To remove the FL, follow the steps below.

1.Turn off the power to the computer. Disconnect the AC adapter and all external cables connected to the computer.

2.Remove the battery pack, optional PC card, HDD pack, optional memory module, modem board, backup and RTC batteries, keyboard, membrane switch, top cover with display assem- bly, speakers, display mask, FL inverter board, LCD module, and microphone.

3.Remove one strip of tape securing the FL cable to the LCD frame and lift up the FL cable.

4.Remove two M2x4 thin-head silver screws and one M2x2 thin-head silver screw to remove the metal FL cover.

5.Carefully lift up the white sheet cover- ing the FL.

6.Lift the yellow FL cable connector until one end is out of the groove.

CAUTION: Handle only the FL cable instead of the FL glass tube to minimize risk of damage or injury.

7.Lift the white FL cable out of its groove to remove the cable and FL.

Toshiba TRR

Page 21

4/00, Tecra