Toshiba 780DVD manual Removing the top cover with display assembly

Page 9

Tecra 780CDM / 780DVD Disassembly Overview, (cont.)

í

î

í

Removing the top cover with display assembly, continued.

6.Turn the computer right side up and open the display panel.

7.Slightly lift up the LCD cable cover and pull it forward to remove it, then remove the plastic lens.

8.Remove the tape off the LCD cables.

9.Remove one M2x6 screw securing the ground cable.

10.Disconnect the LCD cable, FL inverter cable, speaker cable and microphone cable.

11.Remove six M2x6 screws, one M2x8 screw and three M2x4 silver screws securing the top cover.

12.Open two port covers on the back of the computer.

13.Pull out the top cover just below the composite video connector (yellow) to release a latch.

14.Carefully lift up the back side of the top cover with display assembly. Lift slowly to avoid damage to the two latches on the left side of the computer.

Toshiba TRR

Page 15

4/00, Tecra

Image 9
Contents Tecra 780CDM / 780DVD Disassembly Overview Be careful when removing the module Tecra 780CDM / 780DVD Disassembly Overview,Remove six M2x6 silver screws Images / text on the next Disassembling the HDD Pack Tecra 780CDM / 780DVD Disassembly Overview, Opening the palmrest Remove three M2.5x4 silver screws Removing the top cover with display assembly Tecra 780CDM / 780DVD Disassembly Overview, Remove two M2.5x6 screws and one Tecra 780CDM / 780DVD Disassembly Overview, Tecra 780CDM / 780DVD Disassembly Overview, ICs are easily damaged Tecra 780CDM / 780DVD Disassembly Overview,