Toshiba 34HFX84 owner manual From Antenna Stereo VCR

Page 11

Connecting a DVD player with ColorStream® (component video) and a VCR

This connection allows you to watch DVD, VCR, and TV programs, and record TV programs.

Your TV has ColorStream® (component video) inputs. Connecting your TV to a DVD player with component video (such as a Toshiba DVD player with ColorStream®) can greatly enhance picture quality and realism.

–To record one TV program while watching another TV program, tune the VCR to the channel to record, and tune the TV to the channel to watch.

–To record a TV program while watching a DVD, tune the VCR to the channel to record, and select ColorStream HD1 on the TV (see “Selecting the antenna input” on page 25).

You will need:

•two coaxial cables

•one set of standard A/V cable

•one pair of standard audio cables

•one set of component video cables

From

Antenna

	Stereo VCR
			IN
IN from ANT OUT to TV
CH 3			OUT
CH 3
CH 4	VIDEO	L	R
			AUDIO

TV

Note:

For the highest possible picture quality, use component video cables (or an HDMI cable) between the TV and DVD player.

You can connect the component video cables to either set of ColorStream jacks on the TV (HD1 or HD2).

For HDMI connection, see page 14.

The ColorStream HD1/HD2 and HDMI jacks can be used with Progressive (480p, 720p) and Interlaced (480i,1080i) scan systems; however, a 1080i signal will provide the best picture performance.

If your DVD player is not compatible with component video or HDMI, use the S-video connections (plus the standard audio connections) instead (see page 10).

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Introduction


Connecting	yourTV


Usingthe	RemoteControl


Settingup	yourTV


UsingtheTV’s	Features

Appendix

					AUDIO
				L	OUT
	Y	PB	PR	L	L
	Y	PB	PR
S-VIDEO	COMPONENT VIDEO VIDEO			R	R
S-VIDEO	COMPONENT VIDEO VIDEO

OUT

DVD player with component video

Index

11

Image 11

Contents Color Television Dear Customer Safety PrecautionsInstallation Important Safety InstructionsCare ServiceImportant Safety Information Introduction Introduction Welcome to ToshibaExploring your new TV Appendix Index Connecting an antenna or cable TVYou will need Three coaxial cables Connecting a VCRConnecting a cable converter box Connecting your TVUsingtheTV’s Features Connecting a cable converter box and VCRSatellite Receiver Connecting a DVD player or satellite receiver and a VCRFrom Antenna Stereo VCR From DTV Antenna Using Connecting two VCRsConnecting a camcorder One pair of standard analog audio cables Connecting an Hdmi or a DVI device to the Hdmi inputOne Hdmi cable type a connector One HDMI-to-DVI adapter cable Hdmi type a connectorConnecting an audio system Using the Remote Control Preparing the remote control for useInstalling the remote control batteries Remote Control functional key chart CBL/SAT Audio VCR TV/VCR TV/SAT Searching and sampling the code of a device Device code setupIntroduction Connecting YourTV Usingthe RemoteControl Settingup YourTV UsingtheTV’s Features Appendix IndexOperational feature reset Using the volume lock featureDevice code table VCR setup codesCD Player setup codes Learning about the remote control Learning about the menu system Setting up your TVSelecting the antenna input Changing the on-screen display languagePress Enter Press z to select CH Program Adding channels to the TV’s memoryProgramming channels automatically To program channels automaticallyAdding and erasing channels manually Adjusting the tilt correction featureConnecting yourTV Changing channelsSwitching between two channels using SurfLock Adjusting the channel settingsUsing the TV’s Features Switching between two channels using Channel ReturnPress y or z to highlight Connecting Your Usingthe RemoteControlSettingup yourTV Press Enter Repeat steps 4 and 5 for other channelsPress Enter to erase the channel label Labeling channelsClear Selecting the picture size Usingthe FeaturesTheater Wide 1 picture size For 43 format program To lower the picture, press z Press Enter to display the Scroll Adjustment modeTo raise the picture, press y Press y or z to select ON, and then press Enter Using the Auto Aspect featurePress y or z to highlight Auto ASPECT, and then press Settingup YourTV UsingtheTV’s Features Appendix Using the POP double-window featureSwitching the speaker audio main or POP Switching the main and POP picturesDouble-Window aspect ratio Using the programmed channel search functionAbout the auto favorite feature Using the favorite channel search functionIf you cannot remember your PIN code Using the Locks menuUsing the V-CHIP menu Entering the PIN codePress z or y to select an item Enable BlockingOFF To release your setting Unlock TV Rating Independent rating system for broadcastersMpaa Rating Connecting YourTV Usingthe RemoteControl SettingupMpaa Rating Independent rating system for movies Repeat steps 2 and 3 for other channels Locking channelsUnlocking programs temporarily Press EnterPress y or z to highlight Clear ALL, and then press Enter Press Enter New PIN code is now active Locking the video inputsChanging the PIN code OFFSetting Your UsingtheTV’s Features Appendix Index Adjusting the pictureIntroduction Connecting YourTV Usingthe RemoteControlSaving your new preferences Selecting the color temperaturePicture Settings menu appears Press x or to select the mode you preferSelecting the Scan Velocity Modulation SVM Using the CableClear DNR featureReset Resetting picture adjustmentsSelecting the display format for 480p signals only Selecting the cinema modeSelecting the video input source To view text, highlight T1, T2, T3, or T4 Using the closed caption featurePress y or z to highlight Caption or TEXT, and then press Setting the sleep timer Setting the on timerTo display the time on-screen Press Recall Setting the clockPress Enter to start the clock Selecting stereo/SAP broadcasts Adjusting the soundUsingthe Remote Settingup YourTV Muting the soundEnjoying the Dolby Virtual sound feature Audio Settings menu appears Using the WOW surround sound featureAdjusting the sound quality Press y or z to adjust the item, then press EnterCenter Resetting your audio adjustmentsUsing the StableSound feature To turn off the StableSound feature Select OFF in aboveSelecting the Audio OUT sound Connecting Your ControlTurning off the built-in speakers Using the Cyclone sub-woofer system Displaying on-screen information Understanding the auto power off featureUnderstanding the last mode memory feature Selecting the background of the menu displayAppendix SpecificationsT2, T3, or T4. Turn closed captioning OFF TroubleshootingAntenna Black box appears on the screenLimited United States Warranty Limited Canada Warranty Index Page Page Page Manufactured by