Toshiba 34HFX84 owner manual Connecting a cable converter box and VCR, UsingtheTV’s Features

Page 9

Connecting a cable converter box and VCR

This connection allows you to watch and record basic and premium cable channels, watch videotapes, and record one channel while watching another channel. To watch basic cable and use the TV’s features, select ANT-1.

To view premium channels or record with the VCR, select ANT-2, tune the TV and VCR to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels.

You will need:

•four coaxial cables

•one set of standard A/V cables

From Cable

TV

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have a VCR with S-video, use an S- video cable (in the S-video jacks) instead of a standard video cable. Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time, or the picture performance will be unacceptable.

When you use a converter box with your TV, the remote control will not operate some features, such as programming your favorite channels, labeling channels, and locking channels.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Introduction


Connecting	yourTV


Usingthe	RemoteControl

Settingup	yourTV

				IN
IN from ANT OUT to TV				OUT IN
IN from ANT OUT to TV
CH 3				OUT
CH 3				Cable converter box
CH 4	VIDEO	L	R	Cable converter box
			AUDIO

Stereo VCR

UsingtheTV’s Features

Appendix

Index

9

Image 9

Contents Color Television Dear Customer Safety PrecautionsInstallation Important Safety InstructionsCare ServiceImportant Safety Information Introduction Welcome to Toshiba Exploring your new TVIntroduction Appendix Index Connecting an antenna or cable TVConnecting a cable converter box Connecting a VCRConnecting your TV You will need Three coaxial cablesUsingtheTV’s Features Connecting a cable converter box and VCRSatellite Receiver Connecting a DVD player or satellite receiver and a VCRFrom Antenna Stereo VCR From DTV Antenna Connecting two VCRs Connecting a camcorderUsing One Hdmi cable type a connector Connecting an Hdmi or a DVI device to the Hdmi inputOne HDMI-to-DVI adapter cable Hdmi type a connector One pair of standard analog audio cablesConnecting an audio system Preparing the remote control for use Installing the remote control batteriesUsing the Remote Control Remote Control functional key chart CBL/SAT Audio VCR TV/VCR TV/SAT Introduction Connecting YourTV Usingthe RemoteControl Device code setupSettingup YourTV UsingtheTV’s Features Appendix Index Searching and sampling the code of a deviceOperational feature reset Using the volume lock featureDevice code table VCR setup codesCD Player setup codes Learning about the remote control Learning about the menu system Setting up your TVSelecting the antenna input Changing the on-screen display languageProgramming channels automatically Adding channels to the TV’s memoryTo program channels automatically Press Enter Press z to select CH ProgramConnecting yourTV Adjusting the tilt correction featureChanging channels Adding and erasing channels manuallyUsing the TV’s Features Adjusting the channel settingsSwitching between two channels using Channel Return Switching between two channels using SurfLockSettingup yourTV Connecting Your Usingthe RemoteControlPress Enter Repeat steps 4 and 5 for other channels Press y or z to highlightLabeling channels ClearPress Enter to erase the channel label Selecting the picture size Usingthe FeaturesTheater Wide 1 picture size For 43 format program Press Enter to display the Scroll Adjustment mode To raise the picture, press yTo lower the picture, press z Using the Auto Aspect feature Press y or z to highlight Auto ASPECT, and then pressPress y or z to select ON, and then press Enter Settingup YourTV UsingtheTV’s Features Appendix Using the POP double-window featureSwitching the speaker audio main or POP Switching the main and POP picturesDouble-Window aspect ratio Using the programmed channel search functionAbout the auto favorite feature Using the favorite channel search functionUsing the V-CHIP menu Using the Locks menuEntering the PIN code If you cannot remember your PIN codeOFF To release your setting Unlock Enable BlockingTV Rating Independent rating system for broadcasters Press z or y to select an itemConnecting YourTV Usingthe RemoteControl Settingup Mpaa Rating Independent rating system for moviesMpaa Rating Unlocking programs temporarily Locking channelsPress Enter Repeat steps 2 and 3 for other channelsPress y or z to highlight Clear ALL, and then press Enter Changing the PIN code Locking the video inputsOFF Press Enter New PIN code is now activeIntroduction Connecting YourTV Adjusting the pictureUsingthe RemoteControl Setting Your UsingtheTV’s Features Appendix IndexPicture Settings menu appears Selecting the color temperaturePress x or to select the mode you prefer Saving your new preferencesSelecting the Scan Velocity Modulation SVM Using the CableClear DNR featureSelecting the display format for 480p signals only Resetting picture adjustmentsSelecting the cinema mode ResetSelecting the video input source Using the closed caption feature Press y or z to highlight Caption or TEXT, and then pressTo view text, highlight T1, T2, T3, or T4 Setting the sleep timer Setting the on timerSetting the clock Press Enter to start the clockTo display the time on-screen Press Recall Usingthe Remote Settingup YourTV Adjusting the soundMuting the sound Selecting stereo/SAP broadcastsEnjoying the Dolby Virtual sound feature Adjusting the sound quality Using the WOW surround sound featurePress y or z to adjust the item, then press Enter Audio Settings menu appearsUsing the StableSound feature Resetting your audio adjustmentsTo turn off the StableSound feature Select OFF in above CenterConnecting Your Control Turning off the built-in speakersSelecting the Audio OUT sound Using the Cyclone sub-woofer system Understanding the last mode memory feature Understanding the auto power off featureSelecting the background of the menu display Displaying on-screen informationAppendix SpecificationsAntenna TroubleshootingBlack box appears on the screen T2, T3, or T4. Turn closed captioning OFFLimited United States Warranty Limited Canada Warranty Index Page Page Page Manufactured by