Toshiba 34HFX84 Changing channels, Adjusting the tilt correction feature, Connecting yourTV

Page 27

Adding and erasing channels manually

After you have programmed the channels automatically, you can manually add or erase specific channels.

To add or erase channels:

1.Select the channel you want to add or erase. If you are adding a channel, you must select the channel using the Channel Number buttons.

2.Press MENU, and then press x or • until the SET UP menu appears.

3.Press y or z to highlight ADD/ERASE, and then press ENTER to display the pull-down menu.

TV front panel

MENU TV/VIDEO VOLUME CHANNEL

MENU

x •zy

(ENTER)

		Introduction
P		Introduction
P

		Connecting yourTV

LANGUAGE	SET UP
LANGUAGE	ADD
CLOCK SET	ERASE
ANT 1 / 2
TV / CABLE
CH PROGRAM
ADD / ERASE
TILT CORRECTION
: SELECT	ENTER : SET

4.Press y or z to select ADD or ERASE, depending on the function you want to perform.

5.Repeat steps 1– 4 for other channels you want to add or erase.

Changing channels

To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0–9 and 100).

For channels 100 and higher, press the 100 button, and then the next two numbers. For example, to select channel 125, press 100, 2, 5.

To change to the next programmed channel:

Press Channel y or z on the TV or remote control.

Adjusting the tilt correction feature

When you install the TV or change the direction of the TV, the picture may become tilted because of the terrestrial magnetism. If so, the following adjustment should be made for the best possible picture.

To adjust the tilt correction:

1.Press MENU, then press x or • until the SET UP menu appears.

2.Press y or z to highlight TILT CORRECTION, and then press

ENTER.

3.Press x or • to correct any tilt of the picture between +10 and -10.

	SET UP
LANGUAGE
CLOCK SET
ANT 1 / 2
TV / CABLE
CH PROGRAM
ADD / ERASE
T I LT CORRECT I ON		0
: ADJUST	ENTER : SET

POWER

TV

CABLE/SAT LIGHT SLEEP

VCR

DVD 1 2 3

AUDIO1

AUDIO2 4 5 6

MODE

			7			8	9
PIC SIZE			+10
			+10			0
ACTION			100/			0	ENT
MENU			O	FAV		ORI
		NF				ORI	T
		I				TE	T
							HE
E							LI	AT
E							LI		E
ID							N			R
U								K
G			LE	SUB	TIT
			TIT		TIT
	P					LE	A
	U						U
T			FAV				DI
SE			FAV				O
							O
			ENTER
			FAV
CH							VOL
			EXIT
DVD RTN			DVD CLEAR
DVD RTN
CH RTN			INPUT	RECALL			MUTE

SLOW/DIR SKIP/SEARCH

Channel

Number

MENU

ENTER

yzx •

Channel yz

Usingthe	RemoteControl


Settingup	yourTV


UsingtheTV’s	Features


Appendix


Index

27

Image 27

Contents Color Television Dear Customer Safety PrecautionsInstallation Important Safety InstructionsCare ServiceImportant Safety Information Introduction Welcome to Toshiba Exploring your new TVIntroduction Appendix Index Connecting an antenna or cable TVYou will need Three coaxial cables Connecting a VCRConnecting a cable converter box Connecting your TVUsingtheTV’s Features Connecting a cable converter box and VCRSatellite Receiver Connecting a DVD player or satellite receiver and a VCRFrom Antenna Stereo VCR From DTV Antenna Connecting two VCRs Connecting a camcorderUsing One pair of standard analog audio cables Connecting an Hdmi or a DVI device to the Hdmi inputOne Hdmi cable type a connector One HDMI-to-DVI adapter cable Hdmi type a connectorConnecting an audio system Preparing the remote control for use Installing the remote control batteriesUsing the Remote Control Remote Control functional key chart CBL/SAT Audio VCR TV/VCR TV/SAT Searching and sampling the code of a device Device code setupIntroduction Connecting YourTV Usingthe RemoteControl Settingup YourTV UsingtheTV’s Features Appendix IndexOperational feature reset Using the volume lock featureDevice code table VCR setup codesCD Player setup codes Learning about the remote control Learning about the menu system Setting up your TVSelecting the antenna input Changing the on-screen display languagePress Enter Press z to select CH Program Adding channels to the TV’s memoryProgramming channels automatically To program channels automaticallyAdding and erasing channels manually Adjusting the tilt correction featureConnecting yourTV Changing channelsSwitching between two channels using SurfLock Adjusting the channel settingsUsing the TV’s Features Switching between two channels using Channel ReturnPress y or z to highlight Connecting Your Usingthe RemoteControlSettingup yourTV Press Enter Repeat steps 4 and 5 for other channelsLabeling channels ClearPress Enter to erase the channel label Selecting the picture size Usingthe FeaturesTheater Wide 1 picture size For 43 format program Press Enter to display the Scroll Adjustment mode To raise the picture, press yTo lower the picture, press z Using the Auto Aspect feature Press y or z to highlight Auto ASPECT, and then pressPress y or z to select ON, and then press Enter Settingup YourTV UsingtheTV’s Features Appendix Using the POP double-window featureSwitching the speaker audio main or POP Switching the main and POP picturesDouble-Window aspect ratio Using the programmed channel search functionAbout the auto favorite feature Using the favorite channel search functionIf you cannot remember your PIN code Using the Locks menuUsing the V-CHIP menu Entering the PIN codePress z or y to select an item Enable BlockingOFF To release your setting Unlock TV Rating Independent rating system for broadcastersConnecting YourTV Usingthe RemoteControl Settingup Mpaa Rating Independent rating system for moviesMpaa Rating Repeat steps 2 and 3 for other channels Locking channelsUnlocking programs temporarily Press EnterPress y or z to highlight Clear ALL, and then press Enter Press Enter New PIN code is now active Locking the video inputsChanging the PIN code OFFSetting Your UsingtheTV’s Features Appendix Index Adjusting the pictureIntroduction Connecting YourTV Usingthe RemoteControlSaving your new preferences Selecting the color temperaturePicture Settings menu appears Press x or to select the mode you preferSelecting the Scan Velocity Modulation SVM Using the CableClear DNR featureReset Resetting picture adjustmentsSelecting the display format for 480p signals only Selecting the cinema modeSelecting the video input source Using the closed caption feature Press y or z to highlight Caption or TEXT, and then pressTo view text, highlight T1, T2, T3, or T4 Setting the sleep timer Setting the on timerSetting the clock Press Enter to start the clockTo display the time on-screen Press Recall Selecting stereo/SAP broadcasts Adjusting the soundUsingthe Remote Settingup YourTV Muting the soundEnjoying the Dolby Virtual sound feature Audio Settings menu appears Using the WOW surround sound featureAdjusting the sound quality Press y or z to adjust the item, then press EnterCenter Resetting your audio adjustmentsUsing the StableSound feature To turn off the StableSound feature Select OFF in aboveConnecting Your Control Turning off the built-in speakersSelecting the Audio OUT sound Using the Cyclone sub-woofer system Displaying on-screen information Understanding the auto power off featureUnderstanding the last mode memory feature Selecting the background of the menu displayAppendix SpecificationsT2, T3, or T4. Turn closed captioning OFF TroubleshootingAntenna Black box appears on the screenLimited United States Warranty Limited Canada Warranty Index Page Page Page Manufactured by