Toshiba 34HFX84 owner manual Appendix, Specifications

Page 60

Appendix

Specifications

•Note: This model complies with the specifications listed below. Designs and specifications are subject to change without notice. This model may not be compatible with features and/or specifications that may be added in the future.

WARNING: RISK OF ELECTRIC SHOCK !

Never attempt to service the TV yourself. Opening and removing the covers may expose you to dangerous voltage or other hazards. Refer all servicing to a Toshiba Authorized Service Center.

Appendix

Television System

NTSC standard

Channel Coverage VHF: 2 through 13 UHF: 14 through 69

Cable TV: Mid band (A-8 through A-1, A through I) Super band (J through W)

Hyper band (AA through ZZ, AAA, BBB) Ultra band (65 through 94, 100 through 125)

Power Source

120 V AC, 60 Hz

Power Consumption

185 W (average)

Audio Power

10 W + 10 W + 13 W sub-woofer

Speaker Type

Two 6x12 cm + One 10 cm round sub-woofer

Video/Audio Terminals

S-VIDEO INPUT

Y: 1 V(p-p), 75 ohms, negative sync.

C : 0.286 V(p-p) (burst signal), 75 ohms

VIDEO/AUDIO INPUT

VIDEO: 1 V(p-p), 75 ohms, negative sync.

AUDIO: 150 mV(rms) (30% modulation equivalent, 22 k ohms or more)

ColorStream® (component video) INPUT

Y: 1V(p-p), 75 ohms PR: 0.7 V(p-p), 75 ohms PB : 0.7 V(p-p), 75 ohms

AUDIO: 150 mV(rms), 22 k ohms or more

VIDEO/AUDIO OUTPUT

VIDEO: 1 V(p-p), 75 ohms, negative sync.

AUDIO: 150 mV(rms) (30% modulation equivalent,

2.2k ohms or less)

VARIABLE AUDIO OUTPUT

0–300 mV(rms) (30% modulation equivalent,

2.2k ohms or less)

Video/Audio Terminals (cont.)

HDMI INPUT:

HDMI 1, HDMI 2 compliant (type A connector) HDCP compliant

E-EDID* compliant

Suggested scan rates: 1080i, 480p, 480i, 720p

HDMI Audio: 2-channel PCM

32/44.1/48 kHz sampling frequency 16/20/24 bits per sample

Dimensions
Width	33 5/8 inches (854 mm)
Height	24-3/8 inches (619 mm)
Depth	23-3/4 inches (603 mm)

Mass

160 lbs (72.6 kg)

Operating condition

Temperature: 41°F-95°F (5°C-35°C)

Supplied Accessories

Remote Control with 2 size “AA” alkaline batteries

Optional TV Stand

ST34W64

* E-EDID = Enhanced-Extended Display Identification

60

Image 60

Contents Color Television Safety Precautions Dear CustomerImportant Safety Instructions InstallationService CareImportant Safety Information Introduction Welcome to Toshiba Exploring your new TVIntroduction Connecting an antenna or cable TV Appendix IndexConnecting a VCR Connecting a cable converter boxConnecting your TV You will need Three coaxial cablesConnecting a cable converter box and VCR UsingtheTV’s FeaturesConnecting a DVD player or satellite receiver and a VCR Satellite ReceiverFrom Antenna Stereo VCR From DTV Antenna Connecting two VCRs Connecting a camcorderUsing Connecting an Hdmi or a DVI device to the Hdmi input One Hdmi cable type a connectorOne HDMI-to-DVI adapter cable Hdmi type a connector One pair of standard analog audio cablesConnecting an audio system Preparing the remote control for use Installing the remote control batteriesUsing the Remote Control Remote Control functional key chart CBL/SAT Audio VCR TV/VCR TV/SAT Device code setup Introduction Connecting YourTV Usingthe RemoteControlSettingup YourTV UsingtheTV’s Features Appendix Index Searching and sampling the code of a deviceUsing the volume lock feature Operational feature resetVCR setup codes Device code tableCD Player setup codes Learning about the remote control Setting up your TV Learning about the menu systemChanging the on-screen display language Selecting the antenna inputAdding channels to the TV’s memory Programming channels automaticallyTo program channels automatically Press Enter Press z to select CH ProgramAdjusting the tilt correction feature Connecting yourTVChanging channels Adding and erasing channels manuallyAdjusting the channel settings Using the TV’s FeaturesSwitching between two channels using Channel Return Switching between two channels using SurfLockConnecting Your Usingthe RemoteControl Settingup yourTVPress Enter Repeat steps 4 and 5 for other channels Press y or z to highlightLabeling channels ClearPress Enter to erase the channel label Usingthe Features Selecting the picture sizeTheater Wide 1 picture size For 43 format program Press Enter to display the Scroll Adjustment mode To raise the picture, press yTo lower the picture, press z Using the Auto Aspect feature Press y or z to highlight Auto ASPECT, and then pressPress y or z to select ON, and then press Enter Using the POP double-window feature Settingup YourTV UsingtheTV’s Features AppendixSwitching the main and POP pictures Switching the speaker audio main or POPUsing the programmed channel search function Double-Window aspect ratioUsing the favorite channel search function About the auto favorite featureUsing the Locks menu Using the V-CHIP menuEntering the PIN code If you cannot remember your PIN codeEnable Blocking OFF To release your setting UnlockTV Rating Independent rating system for broadcasters Press z or y to select an itemConnecting YourTV Usingthe RemoteControl Settingup Mpaa Rating Independent rating system for moviesMpaa Rating Locking channels Unlocking programs temporarilyPress Enter Repeat steps 2 and 3 for other channelsPress y or z to highlight Clear ALL, and then press Enter Locking the video inputs Changing the PIN codeOFF Press Enter New PIN code is now activeAdjusting the picture Introduction Connecting YourTVUsingthe RemoteControl Setting Your UsingtheTV’s Features Appendix IndexSelecting the color temperature Picture Settings menu appearsPress x or to select the mode you prefer Saving your new preferencesUsing the CableClear DNR feature Selecting the Scan Velocity Modulation SVMResetting picture adjustments Selecting the display format for 480p signals onlySelecting the cinema mode ResetSelecting the video input source Using the closed caption feature Press y or z to highlight Caption or TEXT, and then pressTo view text, highlight T1, T2, T3, or T4 Setting the on timer Setting the sleep timerSetting the clock Press Enter to start the clockTo display the time on-screen Press Recall Adjusting the sound Usingthe Remote Settingup YourTVMuting the sound Selecting stereo/SAP broadcastsEnjoying the Dolby Virtual sound feature Using the WOW surround sound feature Adjusting the sound qualityPress y or z to adjust the item, then press Enter Audio Settings menu appearsResetting your audio adjustments Using the StableSound featureTo turn off the StableSound feature Select OFF in above CenterConnecting Your Control Turning off the built-in speakersSelecting the Audio OUT sound Using the Cyclone sub-woofer system Understanding the auto power off feature Understanding the last mode memory featureSelecting the background of the menu display Displaying on-screen informationSpecifications AppendixTroubleshooting AntennaBlack box appears on the screen T2, T3, or T4. Turn closed captioning OFFLimited United States Warranty Limited Canada Warranty Index Page Page Page Manufactured by