Toshiba 34HFX84 Connecting a VCR, Connecting a cable converter box, Connecting your TV

Page 8

Connecting your TV

Connecting a VCR

This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel.

You will need:

•two coaxial cables

•one set of standard A/V cables

From Cable Box or Antenna

Stereo VCR

IN

IN from ANT OUT to TV

CH 3			OUT
CH 3
CH 4	VIDEO	L	R
			AUDIO

TV

Connecting a cable converter box

This connection allows you to watch basic and premium cable channels.

To watch basic cable and use the TV’s features, select ANT-1. To view premium channels, select ANT-2, tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels.

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have a VCR with S-video, use an S- video cable (in the S-video jacks) instead of the standard video cable.

Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time, or the picture performance will be unacceptable.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Note:

When you use a converter box with your TV, the remote control will not operate some features, such as programming your favorite channels, labeling channels, and locking channels.

You will need:

• three coaxial cables

TV

From Cable

OUT IN

Cable converter box

8

Image 8

Contents Color Television Safety Precautions Dear CustomerImportant Safety Instructions InstallationService CareImportant Safety Information Introduction Introduction Welcome to ToshibaExploring your new TV Connecting an antenna or cable TV Appendix IndexConnecting a VCR Connecting a cable converter boxConnecting your TV You will need Three coaxial cablesConnecting a cable converter box and VCR UsingtheTV’s FeaturesConnecting a DVD player or satellite receiver and a VCR Satellite ReceiverFrom Antenna Stereo VCR From DTV Antenna Using Connecting two VCRsConnecting a camcorder Connecting an Hdmi or a DVI device to the Hdmi input One Hdmi cable type a connectorOne HDMI-to-DVI adapter cable Hdmi type a connector One pair of standard analog audio cablesConnecting an audio system Using the Remote Control Preparing the remote control for useInstalling the remote control batteries Remote Control functional key chart CBL/SAT Audio VCR TV/VCR TV/SAT Device code setup Introduction Connecting YourTV Usingthe RemoteControlSettingup YourTV UsingtheTV’s Features Appendix Index Searching and sampling the code of a deviceUsing the volume lock feature Operational feature resetVCR setup codes Device code tableCD Player setup codes Learning about the remote control Setting up your TV Learning about the menu systemChanging the on-screen display language Selecting the antenna inputAdding channels to the TV’s memory Programming channels automaticallyTo program channels automatically Press Enter Press z to select CH ProgramAdjusting the tilt correction feature Connecting yourTVChanging channels Adding and erasing channels manuallyAdjusting the channel settings Using the TV’s FeaturesSwitching between two channels using Channel Return Switching between two channels using SurfLockConnecting Your Usingthe RemoteControl Settingup yourTVPress Enter Repeat steps 4 and 5 for other channels Press y or z to highlightPress Enter to erase the channel label Labeling channelsClear Usingthe Features Selecting the picture sizeTheater Wide 1 picture size For 43 format program To lower the picture, press z Press Enter to display the Scroll Adjustment modeTo raise the picture, press y Press y or z to select ON, and then press Enter Using the Auto Aspect featurePress y or z to highlight Auto ASPECT, and then press Using the POP double-window feature Settingup YourTV UsingtheTV’s Features AppendixSwitching the main and POP pictures Switching the speaker audio main or POPUsing the programmed channel search function Double-Window aspect ratioUsing the favorite channel search function About the auto favorite featureUsing the Locks menu Using the V-CHIP menuEntering the PIN code If you cannot remember your PIN codeEnable Blocking OFF To release your setting UnlockTV Rating Independent rating system for broadcasters Press z or y to select an itemMpaa Rating Connecting YourTV Usingthe RemoteControl SettingupMpaa Rating Independent rating system for movies Locking channels Unlocking programs temporarilyPress Enter Repeat steps 2 and 3 for other channelsPress y or z to highlight Clear ALL, and then press Enter Locking the video inputs Changing the PIN codeOFF Press Enter New PIN code is now activeAdjusting the picture Introduction Connecting YourTVUsingthe RemoteControl Setting Your UsingtheTV’s Features Appendix IndexSelecting the color temperature Picture Settings menu appearsPress x or to select the mode you prefer Saving your new preferencesUsing the CableClear DNR feature Selecting the Scan Velocity Modulation SVMResetting picture adjustments Selecting the display format for 480p signals onlySelecting the cinema mode ResetSelecting the video input source To view text, highlight T1, T2, T3, or T4 Using the closed caption featurePress y or z to highlight Caption or TEXT, and then press Setting the on timer Setting the sleep timerTo display the time on-screen Press Recall Setting the clockPress Enter to start the clock Adjusting the sound Usingthe Remote Settingup YourTVMuting the sound Selecting stereo/SAP broadcastsEnjoying the Dolby Virtual sound feature Using the WOW surround sound feature Adjusting the sound qualityPress y or z to adjust the item, then press Enter Audio Settings menu appearsResetting your audio adjustments Using the StableSound featureTo turn off the StableSound feature Select OFF in above CenterSelecting the Audio OUT sound Connecting Your ControlTurning off the built-in speakers Using the Cyclone sub-woofer system Understanding the auto power off feature Understanding the last mode memory featureSelecting the background of the menu display Displaying on-screen informationSpecifications AppendixTroubleshooting AntennaBlack box appears on the screen T2, T3, or T4. Turn closed captioning OFFLimited United States Warranty Limited Canada Warranty Index Page Page Page Manufactured by