Toshiba C-DR0101 instruction manual Clock Settings, Time Sync Master / Slave

Page 14

7.3. Clock Settings

Set the date and time. Perform this setting when the Recorder is used for the first time or when the date and time indication has been deleted because the power was switched off for a long period of time.

Note

•Previously logged data times are not updated even if the Clock Settings are changed during use.

•The data times will be lost if the power was switched off for 30 days or more. Set the date and time again. Memory backup: 720 hours (fully charged)

TIME SYNC : Synchronizes the times of other Recorders (slave units) with that of a specified Recorder (master unit) when multiple Recorders are used.

SYNC TIME : Sets the synchronization time.

Note

The Time Sync function cannot be operated during recording.

•Move the cursor with the ( ) or ( ) key, and change setting values with the (–) or (+) key.

•After completing the settings of time (hour, minute, second), confirm the time with the Select key.

•The indication "Clock Setting Completed" is displayed on the screen after setting completion.

•Current time is displayed in the lowest part of the screen.

•Confirm the setting with the Menu key, and return to the previous screen.

•Each setting item and its setting value and contents are as shown in the table below.

CLOCK

SETTING

 

THU

JAN / 01 /

 

 

00:00:00

04

TIME

SETTING : SELECT KEY

TIME

SYNC

[ SLAVE]

SYNC

TIME

[00H]

SUMMER

TIME SETTING

 

<CURRENT

TIME>

 

THU

JAN / 01 / 04

00:00:00

 

 

 

 

 

 

Setting Item

Setting Value

Contents

 

 

 

TIME SYNC

MASTER / SLAVE

MASTER: Designates the master unit.

(Time

 

SLAVE: Designates the slave unit.

Synchronization)

 

 

 

 

 

SYNC TIME (Synch-

00H / 01H / 02H / 03H / 04H / ...

Select and set the synchronization time.

ronization Time)

up to 23H

 

 

 

 

* The underlined contents are factory-preset values.

Note

Setting the Time Sync settings to "SLAVE," and the Disk Setting’s Disk Mode to "SERIES" places the Recorder in Disk Full mode, causing the Disk Full indicator to light. Perform this setting when using Series Recording. Refer to p. 41; Expansion System (Series Recording).

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 1CH Digital Video Recorder C-DR0100 Table of Contents Operation Digital Video Recorder Activation and Termination Ntsc version complies with Part 15 of the FCC Rules ModificationsWhen installing the Recorder Safety PrecautionsSafety Symbol and Message Conventions When Using the RecorderFeatures General DescriptionHandling Precautions Nomenclature and Functions Failure Indicator Alarm Reset KeyDisk Full/Failure Indicator Disk Full Indicator Search KeyControl Input/Output Terminal Alarm Reset Output Terminal Main Power SwitchRecording Stop Input Terminal Switcher Video Input Terminal Alarm Input TerminalEnter the setting screen Setting Item Chart and Setting ProceduresBasic Setting Procedures Select the setting valueSetting Item Chart Setting ItemMain Menu Screen Individual Item SettingsPlayback Settings Clock Settings Time Sync Master / SlaveExample Disk SettingsSummer Time Daylight Saving Time Setting Disk Mode Play Mode Normal Recording SettingsREC Mode RE-REC / Stop / Series Mirroring HDD-AGeneral Recording Settings Internal Timer Recording SettingsTime Timer Schedule Screen SettingsDate Daily / Weekly / Cancel REC PatternScreen Alarm Recording SettingsWith the or + key Table belowRecording period when input mode is set to Level About the Alarm Input ModeRecording period when input mode is set to Edge Screen Display Settings Key Lock Key Lock ReleaseCtrl Switcher Sync On / OFF / Time Sync Communication SettingsNetwork Settings RS232C BaudLog Display General/ Timer Recording Logs General/ Timer Rec LogAlarm Recording Logs Alarm Rec Log Failure Logs System MaintenanceMenu Default Settings HDD-B Disk FormattingDR0101, C-DR0105 ALLDigital Video Recorder Activation and Termination Recorders ActivationWhen the Power Fails during Recording Operation After Power Failure RestorationWhen the Failure Screen Is Displayed Recorder’s TerminationScreen Display during Recording RecordingType of Recording Recording PrioritiesPage Keys to Be Used in Recording Following keys are used in recordingTHU JAN 00 00 Screen Display during Playback PlaybackType of Playback Performing Various Playback Fanctions Keys to Be Used in PlaybackPerforming Playback Forward Frame Playback and Reverse Frame Playback Forward Block Playback and Reverse Block PlaybackAbout the Playback Start Position Date/Time and Block Searches Search FunctionsKeys to Be Used in Searching Basic Date/Time Search and Block Search OperationsBlock Search Operation Time Shift Search Preparations for Connections When Using the 24V AC or 12V DC or AC Mains CameraConnections Connections to the Monitor TVBasic System Expansion System Series RecordingConnection Examples Power Sync cameras cannot be used Connection to the Multi-switcherBasic System Combined with the C-MS91D Multi-switcher Expansion System Combined with the C-MS91D Multi-switcher MasterWhen using the C-DR0101 Recording Picture Quality SettingWhen using the C-DR0100 Recording Time TableLevel 32KB 137 206 412 687 1031 2063 4126 6189 When using the C-DR0105Level 40KB 110 166 332 553 830 1660 3321 4982 8303 Lebel 24KB 181 272 544 907 1361 2723 5447 8170RS-232C Connector Pin Arrangement External Terminal SpecificationsRS-232C Communication Specifications Rules of Overall CommunicationsRS-232C Communication Format Controller Digital Recorder RS-232C Communication Command Controller Digital RecorderKeys Commands Menu Setting Commands Search Menu Execution Command Menu Setting Content Request CommandLog Request Command RS-232C Communication Format Digital Recorder Controller RS-232C Communication Command Digital Recorder ControllerKey response command ParameterMenu Setting Content Response Command STX LEN Command Para Data Log Content Response CommandSearch menu result command About the Ethernet TerminalRack Mounting If YOU Think There is a Failure Troubleshooting Symptom Possible Cause RemedySpecifications 0dB =

C-DR0101 specifications

The Toshiba C-DR0101 is an innovative digital radiography (DR) system designed to enhance imaging capabilities in medical facilities. This advanced system combines Toshiba's cutting-edge technology with user-friendly features to improve diagnostic efficiency and patient care.

One of the standout features of the C-DR0101 is its proprietary flat-panel detector, which provides high-resolution images with exceptional detail. This detector offers a wide dynamic range, maximizing the quality of images captured in various clinical situations, from routine examinations to complex procedures. The system is equipped with advanced image processing algorithms that enhance image clarity and reduce noise, ensuring that healthcare professionals have access to accurate diagnostics.

The C-DR0101 is designed with ease of use in mind. Its intuitive user interface streamlines workflow, allowing radiologists and technicians to quickly select imaging protocols and adjust settings as needed. This user-friendly design not only saves time but also minimizes the learning curve for new operators. The system's compact footprint allows for easy integration into existing radiology departments, making it a versatile choice for various healthcare environments.

In terms of technology, the C-DR0101 utilizes wireless connectivity, which allows for more flexible positioning of the detector and reduces clutter in the exam room. This wireless feature also facilitates the seamless transfer of images to the hospital's information system, enabling quick access to patient data and images for timely decision-making.

Another key characteristic of the C-DR0101 is its enhanced patient safety features. The system is designed to minimize radiation exposure while still delivering high-quality images. This is achieved through advanced dose management technologies and customizable exposure settings tailored to the specific needs of each patient. This focus on patient safety aligns with the goals of modern healthcare to prioritize the well-being of patients while delivering effective diagnostic imaging solutions.

The Toshiba C-DR0101 stands out in the field of digital radiography through its combination of advanced imaging technology, user-friendly design, and commitment to patient safety. As healthcare continues to evolve, systems like the C-DR0101 play a crucial role in ensuring that medical professionals can provide prompt and accurate care.
Top Page Image Contents