Toshiba C-DR0101 instruction manual Basic System, Expansion System Series Recording

Page 41

13.4.Combination With The Digital Video Recorder/ Multi-switchers (C-MS91D and C-MS161D)

The Digital Video Recorder has been designed with an emphasis on the synchronization with the TOA Multi- switchers (C-MS91D, C-MS161D).

By synchronizing the Digital Video Recorder with the Multi-switcher, the following advantages – unavailable to conventional systems using analog time-lapse VCRs – can be realized.

1.The Multi-switcher does not need to be operated when operating the Digital Video Recorder.

2.The Digital Video Recorder’s main menu screen or search screen can be easily displayed, facilitating settings and search operations.

The combined Digital Video Recorder/Multi-switcher system is called a basic system in this manual.

Since the Multi-switcher has 2 VCR output terminals, hard disk space can be doubled by connecting two Digital Video Recorders. This system is called an expansion system. The expansion system does not permit the synchronization between the Digital Video Recorder and the Multi-switcher.

13.4.1. Basic System

Perform connections as shown in connection examples. (Refer to p. 43)

Set the Multi-switcher (C-MS91D and C-MS161D) and the Digital Video Recorder as follows:

• Multi-switcher settings

Perform remote and recording settings as follows:

 

Setting Items

Contents

 

 

 

 

Recording Pattern

RS-232C

 

Operation

 

Remote

 

 

Motion Detection

RS-232C

Settings

Pattern Operation

 

 

RS-232C

38.4kbps (Default)

 

RS-232C Protocol

1 (Default)

 

 

 

Recording

Recording Device

2

Settings

 

 

Buzzer/

Date/Time (VCR)

OFF*1

Character

 

 

Display Settings

 

 

 

 

 

• Digital Video Recorder settings

Perform communication settings as follows:

 

Setting Items

Contents

 

 

 

 

RS-232C

38400bps (Default)

Communication

Transmission Rate

 

 

 

Settings

RS-232C Flow Control

OFF (Default)

Switcher

ON

 

 

Synchronization*2

 

When perform-

Recording Pattern

Match the Recorder’s

ing Internal

 

 

settings to those of the

Timer Recording

Motion Detection

Multi-switcher

settings

Pattern

 

 

 

 

Note

*1 Use the Digital Video Recorder’s date/time display function for date/time display. If set at both the Multi- switcher and Digital Video Recorder, characters overlap and cannot be seen clearly.

*2 Recording Pattern, Motion Detection Pattern, Camera/ VCR mode selection, and Time Synchronization switcher functions can all be controlled by the Digital Video Recorder. However, when syncronizing the switcher's clock from the Recorder, set the Recorder's clock Time Synchronization setting to "MASTER." Time synhronization cannot be performed if set to "SLAVE."

When only performing time synchronization, set the communication swither synchronization setting to "TIME SYNC." Please note that in this mode Recording Pattern,Motion Detection Pattern, and Camera/ VCR mode selection functions cannot be controlled.

• For more information on the Multi-switcher’s settings, refer to the instruction manual for the Multi-switcher.

13.4.2. Expansion System (Series Recording)

Perform connections as shown in connection examples. (Refer to p. 44)

The Digital Video Recorder settings are as follows:

 

Setting Items

First Digital Video Recorder

Second Digital Video Recorder

 

 

 

 

 

 

 

 

 

 

Recording Mode

SERIES

 

SERIES

 

 

 

 

 

 

 

 

 

 

Time Synchronization

MASTER

 

SLAVE

 

 

 

 

 

 

 

 

 

 

Disk Full indicator status

OFF

 

ON

 

 

 

 

 

 

 

 

 

• Operation

 

 

 

 

 

If the first Digital Video Recorder’s hard disk space becomes full, a signal is provided from the Disk Full Output

 

terminal. When the signal is received at the second Digital Video Recorder’s Recording Start Input terminal, its

 

Disk Full mode is reset, allowing recording to be started in the second unit.

 

Note

 

 

 

 

 

• Recording operation and Internal Timer Recording cannot be performed at the front panel of the Digital

 

Video Recorder set to Disk Full mode.

 

 

 

 

• Multi-switcher can be synchronized from the unit set to master through the RS-232C interface.Set

41

Communication Setting’s Switcher Synchronization to “TIME SYNC.”

 

 

Page 40 Page 42
Image 41
Page 40 Page 42
Contents 1CH Digital Video Recorder C-DR0100 Table of Contents Operation Digital Video Recorder Activation and Termination Modifications Ntsc version complies with Part 15 of the FCC RulesSafety Symbol and Message Conventions Safety PrecautionsWhen installing the Recorder When Using the RecorderGeneral Description FeaturesHandling Precautions Nomenclature and Functions Disk Full/Failure Indicator Disk Full Indicator Alarm Reset KeyFailure Indicator Search KeyRecording Stop Input Terminal Switcher Video Input Terminal Main Power SwitchControl Input/Output Terminal Alarm Reset Output Terminal Alarm Input TerminalBasic Setting Procedures Setting Item Chart and Setting ProceduresEnter the setting screen Select the setting valueSetting Item Setting Item ChartMain Menu Screen Individual Item SettingsPlayback Settings Time Sync Master / Slave Clock SettingsExample Disk SettingsSummer Time Daylight Saving Time Setting REC Mode RE-REC / Stop / Series Recording SettingsDisk Mode Play Mode Normal Mirroring HDD-AInternal Timer Recording Settings General Recording SettingsDate Daily / Weekly / Cancel Timer Schedule Screen SettingsTime REC PatternWith the or + key Alarm Recording SettingsScreen Table belowRecording period when input mode is set to Level About the Alarm Input ModeRecording period when input mode is set to Edge Screen Display Settings Key Lock Release Key LockNetwork Settings Communication SettingsCtrl Switcher Sync On / OFF / Time Sync RS232C BaudLog Display General/ Timer Recording Logs General/ Timer Rec LogAlarm Recording Logs Alarm Rec Log Failure Logs System MaintenanceMenu Default Settings DR0101, C-DR0105 Disk FormattingHDD-B ALLRecorders Activation Digital Video Recorder Activation and TerminationWhen the Failure Screen Is Displayed Operation After Power Failure RestorationWhen the Power Fails during Recording Recorder’s TerminationType of Recording RecordingScreen Display during Recording Recording PrioritiesPage Following keys are used in recording Keys to Be Used in RecordingTHU JAN 00 00 Screen Display during Playback PlaybackType of Playback Performing Various Playback Fanctions Keys to Be Used in PlaybackPerforming Playback Forward Block Playback and Reverse Block Playback Forward Frame Playback and Reverse Frame PlaybackAbout the Playback Start Position Keys to Be Used in Searching Search FunctionsDate/Time and Block Searches Basic Date/Time Search and Block Search OperationsBlock Search Operation Time Shift Search Connections When Using the 24V AC or 12V DC or AC Mains CameraPreparations for Connections Connections to the Monitor TVExpansion System Series Recording Basic SystemConnection Examples Power Sync cameras cannot be used Connection to the Multi-switcherBasic System Combined with the C-MS91D Multi-switcher Master Expansion System Combined with the C-MS91D Multi-switcherWhen using the C-DR0100 Recording Picture Quality SettingWhen using the C-DR0101 Recording Time TableLevel 40KB 110 166 332 553 830 1660 3321 4982 8303 When using the C-DR0105Level 32KB 137 206 412 687 1031 2063 4126 6189 Lebel 24KB 181 272 544 907 1361 2723 5447 8170RS-232C Communication Specifications External Terminal SpecificationsRS-232C Connector Pin Arrangement Rules of Overall CommunicationsRS-232C Communication Format Controller Digital Recorder RS-232C Communication Command Controller Digital RecorderKeys Commands Menu Setting Commands Search Menu Execution Command Menu Setting Content Request CommandLog Request Command Key response command RS-232C Communication Command Digital Recorder ControllerRS-232C Communication Format Digital Recorder Controller ParameterMenu Setting Content Response Command Search menu result command Log Content Response CommandSTX LEN Command Para Data About the Ethernet TerminalRack Mounting Symptom Possible Cause Remedy If YOU Think There is a Failure Troubleshooting0dB = Specifications

C-DR0101 specifications

The Toshiba C-DR0101 is an innovative digital radiography (DR) system designed to enhance imaging capabilities in medical facilities. This advanced system combines Toshiba's cutting-edge technology with user-friendly features to improve diagnostic efficiency and patient care.

One of the standout features of the C-DR0101 is its proprietary flat-panel detector, which provides high-resolution images with exceptional detail. This detector offers a wide dynamic range, maximizing the quality of images captured in various clinical situations, from routine examinations to complex procedures. The system is equipped with advanced image processing algorithms that enhance image clarity and reduce noise, ensuring that healthcare professionals have access to accurate diagnostics.

The C-DR0101 is designed with ease of use in mind. Its intuitive user interface streamlines workflow, allowing radiologists and technicians to quickly select imaging protocols and adjust settings as needed. This user-friendly design not only saves time but also minimizes the learning curve for new operators. The system's compact footprint allows for easy integration into existing radiology departments, making it a versatile choice for various healthcare environments.

In terms of technology, the C-DR0101 utilizes wireless connectivity, which allows for more flexible positioning of the detector and reduces clutter in the exam room. This wireless feature also facilitates the seamless transfer of images to the hospital's information system, enabling quick access to patient data and images for timely decision-making.

Another key characteristic of the C-DR0101 is its enhanced patient safety features. The system is designed to minimize radiation exposure while still delivering high-quality images. This is achieved through advanced dose management technologies and customizable exposure settings tailored to the specific needs of each patient. This focus on patient safety aligns with the goals of modern healthcare to prioritize the well-being of patients while delivering effective diagnostic imaging solutions.

The Toshiba C-DR0101 stands out in the field of digital radiography through its combination of advanced imaging technology, user-friendly design, and commitment to patient safety. As healthcare continues to evolve, systems like the C-DR0101 play a crucial role in ensuring that medical professionals can provide prompt and accurate care.
Top Page Image Contents