Note:
For a television, press the device button TV (4), then continue with step 8.
7.Press the up or down arrow button (6). The next device appears in the LCD display (2).
8.Confirm the selection with the OK button (7). SEARCH KEY? appears on the LCD display (2).
Note:
The remote control searches the device list in the forward direction. To change the search direction, press "Minus" on the CH button (17). To return to a forward search, press "Plus" on the CH button (17).
9.Press the "Plus" CH button (17) repeatedly until your device responds.
10.Press the OK button (7). The device code is saved. SUCCESS appears in the LCD display (2).
11.Press various buttons on the remote control to check the setting. If your device only partially responds, repeat the steps with the next device code.
BRAND CODES
Select a manufacturer code from the "Manufacturer codes" table. The table can be found at the end of the operating in- structions.
Note:
To conclude your input, press the EXIT button (8).
1.Switch on the device for which you would like to program the remote control.
2.Hold the S button (5) pressed until
3.Press the right arrow button (6). LIST CODES appears in the LCD display (2).
4.Press the down arrow button (6) repeatedly until BRAND CODES appears in the LCD display (2).
5.Press the right arrow button (6). MODE KEY? appears in the LCD display (2).
6.Press the desired device button (4). DEVICE? TV appears in the LCD display (2).
Note:
For a television, press the device button TV (4), then continue with step 8.
7.Press the up or down arrow button (6). The next device in the list is displayed.
19