Note:
If "LEARN ERROR“ appears in the LCD display (2), repeat the learning function process starting from step 5.
7.Hold the button on the original remote control pressed until first SUCCESS then LEARN MORE? appears in the LCD display (2).
Note:
To end the learning function, press the EXIT button (8).
8.Press the right arrow button (6) to learn more buttons. LEARN MORE? appears in the LCD display (2).
Repeat steps 5 to 7 to learn more buttons.
MODE CLEAR
Clearing the learned buttons of a device.
1.Hold the S button (5) pressed until
2.Press the down arrow button (6) repeatedly until LEARN- SETUP appears in the LCD display (2).
3.Press the right arrow button (6). MODE LEARN appears on the LCD display (2).
4.Press the down arrow button (6) repeatedly until MODE CLEAR appears in the LCD display (2).
5.Press the right arrow button (6). MODE KEY? appears in the LCD display (2).
6.Press the desired device button (4). CONFIRM CLEAR appears in the LCD display (2).
7.Press the right arrow button (6). First PLEASE WAIT... then SUCCESS appears in the LCD display (2).
ALL LEARN CLEAR
Clearing the learned buttons of all devices.
1.Hold the S button (5) pressed until
2.Press the down arrow button (6) repeatedly until LEARN- SETUP appears in the LCD display (2).
3.Press the right arrow button (6). MODE LEARN appears in the LCD display (2).
4.Press the down arrow button (6) repeatedly until ALL LEARN CLEAR appears in the LCD display (2).
5.Press the right arrow button (6). CONFIRM CLEAR appears in the LCD display (2).
6.Press the right arrow button (6). First PLEASE WAIT... then
SUCCESS appears in the LCD display (2).
Then the standard display appears.
26