5.Press the down arrow button (6) repeatedly until the desired TIMER appears in the LCD display (2).
6.Press the right arrow button (6). CONFIRM CLEAR appears in the LCD display (2).
7.Press the right arrow button (6). First SUCCESS then CODE SETUP appears in the LCD display (2).
8.Press the EXIT button (8) repeatedly until the standard display appears in the LCD display (2).
Note:
If no button is pressed for approx. 30 seconds, the message "TIMEOUT" appears in the LCD display (2). Then the standard display is shown automatically.
LEARN-SETUP – Learning functions
The universal remote control can learn the button signals of an original remote control. Take note of the following points:
•The learning function can learn a maximum of 150 button signals.
•Use new batteries for the universal remote control and the original remote control.
•Maintain a distance of at least one metre to other light sources. The light sources could disrupt the infrared trans- mission.
•You can extend the configured device codes using the l earning function.
•Place the universal remote control and the original remote control on a flat surface at a distance between 15 and 50 mm. See the graphic "Remote control spacing".
Remote control spacing
The "LEARN SETUP“ menu offers the following functions: MODE LEARN – Learn buttons for a device.
MODE CLEAR – Clear learned buttons for a device.
ALL LEARN CLEAR – Clear learned buttons for all devices.
24