Macro Clear, Playing back a saved macro

Note:

After the tenth button press, the macro is automatically saved.

To save the macro at an earlier point, press the button MACRO (11).

7.Press the desired button sequence. With each button press, the counter goes up by one: MACRO1 KEY? 03, MACRO 1 KEY? 04 etc. After the tenth button press, the macro is saved and SUCCESS appears in the LCD display (2).

Note:

Note the programmed macros in the table "Personal macros" at the end of these operating instructions.

Playing back a saved macro

Note:

The remote control must remain pointed at the device.

1.Press the MACRO button (11). MACRO KEY? appears in the LCD display (2).

Note:

If no macro is saved under 1, for example, MACRO 1 VOID appears in the LCD display (2).

2.Press the number button (13) 1, 2 or 3. The LCD display (2) shows MACRO 1, for example. The infrared symbol (22) blinks and the saved button sequence is sent.

MACRO CLEAR

Clearing a saved macro.

1.Hold the S button (5) pressed until CODE-SETUP appears in the LCD display (2).

2.Press the down arrow button (6) repeatedly until MACRO SETUP appears in the LCD display (2).

3.Press the right arrow button (6). MACRO SET appears in the LCD display (2).

4.Press the down arrow button (6). MACRO CLEAR appears in the LCD display (2).

5.Press the right arrow button (6). MACRO KEY? appears in the LCD display (2).

6.Press the number button (13) 1, 2 or 3. CONFIRM CLEAR appears in the LCD display (2).

7.Press the right arrow button (6). First PLEASE WAIT... then SUCCESS appears in the LCD display (2).