Silvercrest KH2150 Entering device codes for combination devices, Controlling combination devices

Page 22

Note:

All entries in the device list can be found in the overview graphic.

8.Confirm the selection with the OK button (7). BRAND CODES? appears in the LCD display (2).

9.Search for the manufacturer code in the "Manufacturer codes" table in the appendix to these operating instructions.

10.Enter the manufacturer code with the number buttons

(13). SEARCH KEY? appears in the LCD display (2). 11.Press the CH button (17) until the device responds.

SEARCH... appears in the LCD display (2).

Note:

To change the search direction, press "Minus" on the CH button (17).

12.Press the OK button (7). The device code is saved. SUCCESS appears in the LCD display (2).

13.Press various buttons on the remote control to test the functions. If your device only partially responds, repeat

steps 1 to 11 with a different manufacturer code from the table.

Repeat steps 1 to 11 for all devices that you would like to operate.

Entering device codes for combination devices

For combination devices, such as television/VCR or DVD/ VCR, it is necessary to enter a device code for each device type.

Controlling combination devices

Some combination devices, such as TV/VCR or DVD/VCR, have separate device buttons on the original remote control.

1.Press device button (4) DVD. The DVD signal is sent.

2.Press the S button (5). DVD (S) DATE 1: 1 appears in the LCD display (2).

3.Press device button (4) DVD. The VCR signal is sent.

Note:

Not all devices support switching between two devices with the S button (5).

Display device code

The current device code for each device can be displayed.

Press and hold the device button (4). The LCD display (2) shows DVD CODE 0768, for example.

Note:

Note the identified device code in the table "Personal device codes" at the end of these operating instructions.

20

Image 22
Contents Universal Remote Control Page SYSTEM-SETUP-System settings Unpacking the deviceMACRO-SETUP Macro functions Safety Proper useAppliance Overview Damage to the deviceFirst use Unpacking the device / checking the package contentsInserting the batteries Operating elements LCD displayButtons Exit button Button for one-/two-digit programme numbers Video text buttonsNumber buttons Playback buttons and function buttonsMenu button SYSTEM-SETUP-System settingsCH button EPG buttonVOL/MUTE Setup SYSTEM-SETUP overviewTIME-SETUP VOL/MUTE ResetVOL/MUTE SET DATE-SETUP Press the up or down arrow button 6 to set the yearBacklight Setup SYSTEM-RESETCODE-SETUP Device code List CodesCODE-SETUP overview Search Codes Enter CodesAutomatic search Manual search Brand Codes Controlling combination devices Entering device codes for combination devicesDisplay device code TV Sleep Setup Timer Setup Timer functionsTIMER-SETUP overview Timer Setup Select a value between 1 and 90 minutesTimer X SET LEARN-SETUP Learning functions Remote control spacingMode Learn Learn Setup overviewMode Clear ALL Learn ClearMACRO-SETUP overview MACRO-SETUP Macro functionsMacro SET Macro Clear Playing back a saved macroCleaning the remote control Maintenance and CleaningBattery maintenance DisposalTroubleshooting Problem Possible cause SolutionTechnical data Manufacturer codesPersonal macros Personal device codesConformity ImporterWarranty and Service Warranty Description of fault