Silvercrest KH2150 operating instructions Safety, Proper use

Page 5

UNIVERSAL REMOTE

CONTROL KH2150

Safety

Proper use

Children may only operate the remote control under adult supervision.

The universal remote control can replace a maximum of ten remote controls. It can only be used for entertainment electronics with infrared receivers.

The functions of the universal remote correspond to those of the original remote controls. The universal remote control is intended for private use. It is not suitable for commercial use. Any other use is considered improper use. The manufacturer declines to accept responsibility for damage(s) arising from improper use.

Risk of injury through incorrect handling of batteries!

Batteries must be handled with special care. Take note of the following safety instructions:

Take the batteries out of the battery compartment as soon as they are empty.

Do not throw batteries into a fire. Never subject batteries to high temperatures.

If you will not be using the device for a longer period of time, remove the batteries to prevent them from discharging.

Explosion hazard! Non-rechargeable batteries must never be recharged.

Do not open the batteries or short-circuit them.

Battery acid leaking from a battery can cause inflammation of the skin. In event of contact with the skin, rinse with large amounts of water. If the liquid comes into contact with your eyes, rinse thoroughly with water, do not rub and immediately consult a doctor.

Laser

The universal remote control has an infrared diode of laser class 1. A safety system prevents the emission of hazardous laser radiation during use. To prevent eye injuries, do not modify or damage the safety system of the device.

3

Image 5
Contents Universal Remote Control Page Unpacking the device SYSTEM-SETUP-System settingsMACRO-SETUP Macro functions Proper use SafetyDamage to the device Appliance OverviewInserting the batteries Unpacking the device / checking the package contentsFirst use LCD display Operating elementsButtons Exit button Number buttons Video text buttonsButton for one-/two-digit programme numbers Playback buttons and function buttonsCH button SYSTEM-SETUP-System settingsMenu button EPG buttonSYSTEM-SETUP overview VOL/MUTE SetupVOL/MUTE SET VOL/MUTE ResetTIME-SETUP Press the up or down arrow button 6 to set the year DATE-SETUPSYSTEM-RESET Backlight SetupList Codes CODE-SETUP Device codeCODE-SETUP overview Automatic search Enter CodesSearch Codes Manual search Brand Codes Display device code Entering device codes for combination devicesControlling combination devices TIMER-SETUP overview Timer Setup Timer functionsTV Sleep Setup Select a value between 1 and 90 minutes Timer SetupTimer X SET Remote control spacing LEARN-SETUP Learning functionsLearn Setup overview Mode LearnALL Learn Clear Mode ClearMacro SET MACRO-SETUP Macro functionsMACRO-SETUP overview Playing back a saved macro Macro ClearBattery maintenance Maintenance and CleaningCleaning the remote control DisposalProblem Possible cause Solution TroubleshootingManufacturer codes Technical dataPersonal device codes Personal macrosImporter ConformityWarranty and Service Warranty Description of fault