Onkyo DV-SP800 Setting compatibility with 96 kHz output, Confirming the settings

■Setting digital audio connections to an AV amplifier or decoder

The [Digital Jack] screen establishes whether digital connections have been made to an AV amplifier, receiver, or external decoder. As there are numerous options available, please refer to the instructions supplied with the component the player is connected to determine what digital audio formats can be decoded. If you have made no digital connections, select [Not Connected].

Audio1 A2 Video1 V2	Language General
Setup Navigator	Dolby Digital
	Dolby Digital/DTS
Amp Connection	Dolby Digital/MPEG
Digital Jack	Dolby D/DTS/MPEG
	PCM
	Not Connected
Compatible with Dolby Digital
Move	ENTER Select SETUP	Exit
Settings: Dolby Digital (Factory setting)

Dolby Digital/DTS

Dolby Digital/MPEG

Dolby D/DTS/MPEG

PCM

Not Connected

Warning

•Do not set [Digital Jack] to [Dolby Digital/DTS] or [Dolby D/DTS/ MPEG] if the amplifier does not have a DTS decoder. If you do so, high volume sound may be output and damage your hearing as well as speakers.

•Select [PCM] when you connect the player to a 2 channel digital stereo amplifier. If you select other than [PCM], high volume sound may be output and damage your hearing as well as speakers.

■Setting compatibility with 96 kHz output

The [96 kHz PCM Audio] screen establishes whether or not the AV component the player is connected to is capable of processing an audio signal with a sampling rate of 96 kHz. This screen only appears if connections have been made to an external AV component as determined in previous screens.

Audio1 A2 Video1 V2	Language		General
Setup Navigator
Amp Connection	No
96kHz PCM Audio	Yes
	Don't Know
Digital jack not compatible with 96kHz
Move	ENTER	Select		SETUP	Exit

Settings: No (Factory setting)

Select if the connected AV component cannot process an audio signal with a sampling rate of 96 kHz.

Yes

Select if the connected AV component can process an audio signal with a sampling rate of 96 kHz.

Don’t Know

Select if you are uncertain whether the connected AV component can process an audio signal with a sampling rate of 96 kHz.

■Confirming the settings

The [Exit Setup Navigator] is the final screen in the Setup Navigator.

Audio1 A2 Video1 V2	Language		General
Setup Navigator
	Save Changes
Exit Setup Navigator	Delete Changes
	Start Again
Changes are saved
Move	ENTER	Select		SETUP	Exit

Settings: Save Changes (Factory setting)

Select to have the player make all of the necessary audio, video and language settings according to your responses in the Setup Navigator.

Delete Changes

Select to exit the Setup Navigator without changing any of the system settings.

Start Again

Select to return to the [OSD Language] screen of the Setup Navigator and do the settings again.

■To change other player settings in the Setup screen menus

The procedure for changing the settings in the Setup screen menus is described on page 46.

23