Onkyo DV-SP800 PureCinema DVD-Video only, Use the cursor button ∞ to select Video Setup and press

•Chroma Level – Adjusts how saturated colors appear.

•Chroma Delay – Compensates for misalignment of the Y (brightness) and the C (color) components.

Adjusts the brightness of the darker images in the picture.

Only effective with progress scan signals.

5Use the cursor buttons (2/3) to adjust the settings. Adjust these while a disc is playing to see the effect of changes immediately.

6Repeat steps 4 and 5 to make adjustments to other settings.

If you would like to save the settings in the player’s memory, be sure to select either [1], [2], or [3] in the [Memory] setting to establish which memory location to save the new settings in. Please note that if you select a location where settings have already been saved, the old settings will be replaced by the new ones.

Memory		Off	1	2 3
Move	ENTER Select		DISPLAY	Check

7When you are finished making adjustments, press ENTER to establish the new settings.

Note

Depending on the disc and your TV/monitor, the effect of these

settings may not be clear.

■PureCinema (DVD-Video only)

Video on a DVD discs may be either video material (originally shot on video) or film material (originally shot on film). Video material has a frame rate of 30 frames/sec. (NTSC), compared with 24 frames/sec. for film. This player converts film material to 60 frames/sec. (in progressive scan mode). PureCinema adjusts the picture so that it matches more closely the picture quality of a cinema screen.

You can see whether video on a DVD disc is film or video material by displaying the video transmission rate (see page 44). If a hash mark (#) appears above the transmission rate display, it is film material.

■Adjusting the picture quality settings

– To create your own setting (2)

1Use the cursor button (3) to select [Start] then press

ENTER.

Video Memory Select

Video Setup

2Use the cursor button (∞) to select [Video Setup] and press

ENTER.

3Press DISPLAY.

DNR		off				max
Fine Focus			On		Off
Sharpness	soft					fine
White Level	min					max
Black Level	min					max
Hue	green					red
Chroma Level	min					max
Gamma		–				+
Memory		Off	1	2 3

4Use the cursor buttons (5/∞) to select the setting and use the cursor buttons (2/3) to adjust the settings.

Adjust these while a disc is playing to see the effect of changes immediately.

5To memorize the setting, select [Memory 1, 2, or 3], then press ENTER.

The previous setting will be erased.

55