Onkyo DV-SP800 instruction manual Adjusting Audio and Video Settings, Using the Setup Screen Menus

Function Setup

Adjusting Audio and Video Settings

The procedure on this page describes how to operate the menus on the Setup screen. These menus are used to set and adjust a number of system settings. The various functions that can be adjusted are covered throughout this manual. The procedure on this page provides a basic outline for using the Setup screen menus.

Using the Setup Screen Menus

1	ON	STANDBY	Press ON (STANDBY/ON on the
			front panel).

6	Use the cursor buttons (3) to enter
	the setting options.
	Example
	Audio1 A2 Video1 V2 Language General
	Audio DRC — Off
	Dolby Digital Out — Dolby Digital

2

	P
TU
SE

3

4

5

Press SETUP.

The Setup screen appears.

Example

Audio1	A2	Video1	V2	Language	General
		Audio DRC		Off
	Dolby Digital Out			On
		DTS Out		— DTS 3PCM
	Linear PCM Out			— Down Sample On
		MPEG Out		— MPEG 3PCM
		Digital Out		— On
	SACD Playback			— 2ch Area
	Move				SETUP Exit

Use the cursor buttons (2/3) to select the menu you want.

As each menu is selected with the cursor, the settings appear below the menu heading.

Use the cursor buttons (∞) to enter the menu.

The top item within the menu becomes highlighted.

Example

Audio1	A2	Video1	V2	Language	General
		Audio DRC		— Off
	Dolby Digital Out			Dolby Digital
		DTS Out		Dolby Digital 3 PCM
	Linear PCM Out			— Down Sample On
		MPEG Out		— MPEG 3PCM
		Digital Out		— On
	SACD Playback			— 2ch Area
	Move				SETUP Exit

Use the cursor buttons (5/∞) to select the setting you want to change.

The options available for each setting appear to the right when the setting is selected. The current setting appears with the setting indicator lit.

DTS Out		DTS
Linear PCM Out		DTS3PCM
MPEG Out	— MPEG 3PCM
Digital Out	— On
SACD Playback	— 2ch Area
Move		SETUP Exit

•Not all menu options can be changed while a disc is playing. In these cases, the options appear grayed out on the screen and cannot be adjusted. To change these settings, press 7 first before pressing SETUP.

•Operating the menu after pressing 7 may cancel the resume function.

•Some menu options are not immediately effective if set while a disc is playing.

To make these settings effective, stop playback and then start again, or change the settings while the disc is stopped.

7	Use the cursor buttons (5/∞) to
	select a new setting and press

ENTER to set the new setting in memory.

8	R				Press RETURN or the cursor button
	E
		T			(2) to exit the options without
		U	R	N

making any changes.

9	TU		Press SETUP to close the Setup
	SE	P
			screen.

The Setup screen closes.

46