Onkyo DV-SP800 instruction manual DVD Player Remote Controller Symptoms Causes Remedies Pages

DVD Player

Remote Controller

Symptoms	Causes		Remedies		Pages
The disc containing the	• The disc containing the MP3 tracks is not		• Check that the track(s) are in the MPEG1		–
MP3 tracks won't play.		formatted in ISO9660.		Audio Layer 3 format.	–
	• The disc is not recorded in MP3 (MPEG-1		• Check that the sampling rate of the
		Audio Layer 3) format with a 32, 44.1 or		track(s) are 44.1 or 48kHz.
		48kHz fixed bit rate.
Some MP3 tracks appear	•	The track name does not end in “.mp3” or	•	This system will not recognize file that	7
to be missing from a disc.		“.MP3”.		does not end in ".mp3" or ".MP3" as an
				MP3 track. Change the track name.
	•	More than 251 folders and tracks are	•	This player only recognizes the first 250	7
		recorded on a disc.		folders and tracks on a disc. If there are
				more folders/tracks than this, you will not
				be able to play them.
	•	A multi-session disc is inserted.	•	This player is not compatible with multi-	7
				session discs. If the disc is multi-session,
				you will only be able to play tracks
				recorded onto the first session.
The buttons on the DVD	•	No batteries are inserted in the remote	•	Insert new batteries.	9
Player operates but the		controller.
buttons on the remote	•	The batteries are worn out.	•	Replace with new batteries.	9
controller do not operate.	•	The remote controller is not pointed at the	•	Point the remote controller at the remote	9
		remote sensor of the DVD Player.		sensor of the DVD Player.
	•	The remote controller is too far from the	•	Operate the remote controller within 5 m.	9
		DVD Player.

Because the unit contains a microcomputer to provide advanced functions, it may malfunction due to external noise or static electricity. If this happens, press the POWER switch on the unit and then press it again after about five seconds.

73