Onkyo CP701 instruction manual Controls & Connectors, Front Panel

For detailed information, refer to the pages in parenthesis.

ASTANDBY/ON button (20)

This button is used to set the DV-CP701 to On or Standby.

Don’t turn on the power until you’ve completed, and double checked all connections (page 16).

BSTANDBY indicator (20)

This indicator lights up when the DV-CP701 is in Standby mode.

CDisc tray (21)

The disc tray has six bays for loading up to six discs.

DDisc tray light

JDISPLAY button (37)

This button is used to display information about the cur- rent disc, title, chapter, or track, including the elapsed time, remaining time, total time, and so on.

KREPEAT button (31)

This button is used with the Repeat function.

LDisplay

See “Display” on page 11 for more information.

MRemote control sensor (15)

This sensor receives control signals from the remote controller.

NPrevious [] button (25, 28)

This light illuminates the disc tray. It comes on when the DV-CP701 is turned on, and is brighter while the disc tray is open.

EDISC SKIP button (21, 22)

This button is used to select the disc bays (i.e., rotate the disc tray) when loading or removing discs, and to select discs for playback.

FDISC SELECT 1–6 buttons (22)

These buttons are used to select discs. Playback starts automatically when a disc is selected with these buttons.

GOpen/Close [] button (21)

This button is used to open and close the disc tray.

HLAST MEMORY button (36)

This button is used with the Last Memory function.

IDIMMER button (29)

This button is used to adjust the display brightness.

This button is used to select the previous chapter or track. During playback it selects the beginning of the current chapter or track.

ONext [] button (25, 28)

This button is used to select the next chapter or track.

PPAUSE [] button (22)

This button is used to pause playback.

QCHAIN MODE button (30)

This button is used with the Chain mode function.

RSTOP [] button (22)

This button is used to stop playback.

SPLAY/ENTER [ ] button (22)

This button is used to start playback and to cancel fast forward and fast reverse. It’s also used to start Chain mode playback.