Onkyo CP701 Basic Playback, Selecting Discs, Starting, Pausing & Stopping Playback

Basic Playback—Continued

DISC SKIP	TOP MENU	MENU
	DISC SELECT
		ENTER
	RETURN	SETUP
	AUDIO	ANGLE SUBTITLE
	DISC 1	DISC 2 DISC 3 STEP/SLOW

DISC1–6	DISC 4 DISC 5 DISC 6
DISC SKIP	DISC SKIP PROGRESSIVE DIMMER
	RC-521DV

PAUSE

STOP

PLAY/ENTER

Selecting Discs

DVD VCD CD MP3 WMA JPEG

The section explains how to select loaded discs.

Starting, Pausing & Stopping Playback

DVD VCD CD MP3 WMA

This section explains how to start, pause, and stop playback.

■ Start	To start playback, press the Play
	[ ] button.
	Playback starts and the Play indicator
	appears on the display.
	If the disc is a DVD-Video or Video CD
Remote controller	with PBC (Playback Control), you may
	need to start playback from a menu (see
	page 24).
	The front panel Play [ ] button performs
	play and enter functions. The remote con-
	troller has separate Play [ ] and
	[ENTER] buttons.

■Pause To pause playback, press the

Remote controller

DISC 1	DISC 2	DISC 3
DISC 4	DISC 5	DISC 6

Use the DISC SELECT buttons to select loaded discs.

On the remote controller these buttons are labelled [DISC 1], [DISC 2], and so on.

On the display, the number of the current disc has a circle around it.

What happens next depends on the type of disc you selected, as follows:

DVD-Video:Typically a menu appears onscreen. See page 24.

Video CD: Playback starts automatically.

Audio CD: Playback starts automatically.

MP3/WMA/JPEG: The Disc Navigator appears onscreen. See page 26.

JPEG-only CD: With some JPEG CDs, picture thumbnails appear onscreen. See page 30.

Pause [] button.

	Playback pauses and the Pause	indica-
	tor appears on the display.
	To resume playback, press the Play [ ]
Remote controller	button.
	Playback resumes and the Pause	indica-
	tor disappears.
■ Stop	To stop playback, press the Stop
	[ ] button.

Playback stops and the Play	indicator
disappears.
Remote controller

Notes:

Notes:

•The type of disc currently selected is shown on the display: DVD, VCD, or CD (see page 11).

•You can select discs while the DV-CP701 is stopped or dur- ing playback.

•You can use the [DISC SKIP] button to skip the current disc and start the next disc. If disc #6 is the current disc, disc #1 will be selected next.

• During playback, you can select chapters or tracks by using the Next [ ] and Previous [ ] buttons.

•When you stop playback of a DVD-Video disc or Video CD, the DV-CP701 remembers the point at which playback was stopped and “Resume” appears onscreen for a few sec- onds. To resume playback from that point, press the Play [ ] button. To cancel the Resume function, press the Stop [] button again. The Resume function is reset when another disc is selected.

•With the Last Memory function you can resume playback from a specific point even if the disc has been removed (see page 36).

•Do not move the DV-CP701 or subject it to vibration dur- ing playback. Doing so may damage your discs or DV- CP701.

•You can improve the picture quality of paused playback with the Pause/Still setting (see page 43).

22