Onkyo Connecting the DV-CP701 Connecting Your Hi-Fi Amp, Connecting for Dolby Digital or DTS

Connecting the DV-CP701—Continued

Connecting Your Hi-Fi Amp

This section explains how to connect the DV-CP701 to a ste- reo hi-fi amp or receiver for better sound quality than that of most TVs. This is ideal for playing your audio CDs and MP3/ WMA discs in the DV-CP701. DVD-Video discs and Video CDs will sound better too. You can also enjoy Dolby Pro Logic, so long as your receiver supports it.

Analog Connection

Notes:

•Be sure to set the Digital Out–>Dolby Digital setting to “Dolby Digital>PCM” (see page 41). Otherwise an unpleasant digital noise may be heard, which may damage your equipment.

•Never connect the DV-CP701 to the AC-3RF input on a Dolby Digital receiver. The AC-3RF format is not sup- ported by the DV-CP701.

Use an RCA/phono audio cable to connect the DV-CP701’s ANALOG AUDIO OUTPUTs to a pair of analog audio inputs on your hi-fi amp or receiver, as shown.

Signal flow

L

R

Connecting for Dolby Digital or DTS

To enjoy Dolby Digital or DTS surround sound, you need to connect one of the DV-CP701 digital audio outputs to the digital input on a Dolby Digital or DTS decoder or an AV receiver with built-in decoders.

This hookup example will also allow you to enjoy Dolby Pro Logic, so long as your decoder or AV receiver supports it.

ANALOG

INPUT

(white) (red)

RCA/phono cable

(white) (red)

	Y		VIDEO OUTPUT
			PB PR	OPTICAL COAXIAL
L				S VIDEO
	AUDIO
		COMPONENT		VIDEO
	OUTPUT
	ANALOG	L		REMOTE
			OUTPUT	CONTROL
R			AUDIO
		R	ANALOG

Notes:

•When you use the analog audio outputs, don’t play DTS CDs or don’t select DTS soundtracks on DVD-Video discs. Doing so will produce unpleasant digital noise, which may damage your equipment.

VIDEO OUTPUT

Y	PB	PR	OPTICAL	COAXIAL
		S VIDEO		AUDIO
				OUTPUT
				DIGITAL
COMPONENT		VIDEO
L			REMOTE	DVD CHANGER
	AUDIO		CONTROL	MODEL NO. DV-CP701

OUTPUT

ANALOG

R

OPTICAL COAXIAL Signal flow

	Connect one or the other
OPTICAL	COAXIAL

1

AV component with

Dolby Digital/DTS decoder

Digital Connection

Use an optical (or coaxial) digital audio cable to connect the DV-CP701’s OPTICAL (or COAXIAL) DIGITAL AUDIO OUTPUT to an optical (or coaxial) input on your hi-fi amp or receiver, as shown.

OPTICAL COAXIAL Signal flow

Connect one or the other

		OPTICAL	COAXIAL
Y	VIDEO OUTPUT
	PB PR	OPTICAL	COAXIAL
		S VIDEO	AUDIO
			OUTPUT
			DIGITAL
COMPONENT		VIDEO
L		REMOTE	DVD CHANGER
	AUDIO	CONTROL	MODEL NO. DV-CP701

OUTPUT

ANALOG

R

Notes:

•Make sure that the Digital Out–>Dolby Digital setting to “Dolby Digital” (see page 41). Otherwise you won’t get surround sound.

•Also refer to the connection information supplied with your AV receiver or decoder.

•When playing Dolby Digital or DTS source material, be sure to select Dolby Digital or DTS decoding, respectively, on your AV receiver or decoder. See the relevant manuals.

•You can experience Dolby Digital only with DVDs that bear the Dolby Digital logo. Likewise, you can experience DTS only with DVDs or CDs that bear the DTS logo.

18