Onkyo CP701 instruction manual Operation Setting Menu, Screen Saver, Pause/Still, Parental Lock

Configuring the DV-CP701—Continued

Screen Saver

DVD VCD CD MP3 WMA JPEG

With the Screen Saver function you can protect your TV against screen burn-in, which can occur when the same image or menu is displayed for a long time.

Off: Screen saver off.

On (default): Screen saver on.

When the Screen Saver function is set to On, and DVD-Video or Video CD playback is paused or stopped for 15 minutes, the Screen Saver function automatically displays a moving image.

Once the screen saver has been activated, you can cancel it by pressing either the Play [ ] button or Pause [ ] button.

3

Remote controller

ENTER

Use the Up/Down []/[ ] buttons to specify the parental lock level from 1 through 8, and then press [ENTER].

The parental lock is now set.

The parental lock levels conform to U.S. movie ratings as follows:

•Level 7: NC-17

•Level 6: R

•Level 4: PG13

•Level 3: PG

•Level 1: G

Notes:

•The Screen Saver function also works with audio CDs and MP3/WMA discs. If you leave playback paused for five minutes, the screen saver will activate.

4	When you’ve finished, press the
Remote controller	[SETUP] button.
	The settings are stored.
SETUP

Operation Setting Menu

Pause/Still

DVD

The Pause/Still setting determines how still pictures are dis- played when DVD-Video playback is paused or when using frame-by-frame playback.

Auto (default): A frame or field is displayed depending on the disc.

Frame: A frame is displayed.

TV pictures are made up of fields, and there are two fields per picture (frame). In general, the Frame option will provide the best picture quality, although in some cases the picture may appear slightly blurred. Since a field has only half as much information, the picture quality will be lower, but it won’t be blurred.

Parental Lock

DVD

With the Parental Lock function you can block access to cer- tain scenes that the authors have flagged as being unsuitable for children.

1	Select Parental Lock–>On, and
Remote controller	then press the [ENTER] button.
	The Security Code box appears onscreen.
ENTER
2	Use the number buttons to enter a
Remote controller	4-digit security code, and then
	press [ENTER].
ENTER	The Level box appears onscreen.

Notes:

•When entering a security code, you can use the [CLEAR] button to delete the numbers entered so far, if necessary.

•This setting can be changed only when playback is stopped.

•Once this setting has been turned on and a security code set, if you want to turn off parental lock, or change the parental lock level, you’ll be prompted to enter the security code.

•Not all discs use parental lock. See the disc’s sleeve notes for details.

•Discs with parental lock may cut certain scenes, replace certain scenes with children-friendly scenes, or prevent playback of the entire disc.

•If you forget the security code, instead of entering the num- bers, press the STOP [] button four times.

•When using a disc that uses parental control to restrict playback, occasionally, depending on the DV-CP701’s operating status, you may not be able to remove the disc by using the [OPEN/CLOSE] button. If this does occur, close the disc tray, use the [DISC SKIP] button to select another disc bay, open the tray again, and then remove the disc.

PBC

VCD

With the PBC setting you can enable or disable PBC (Play- back Control) functions on Video CDs.

Off: PBC functions disabled.

On (default): PBC functions enabled.

Notes:

•PBC functionality varies from disc-to-disc. See the disc’s sleeve notes for details.

•Not all PBC Video CDs use all of the PBC functions sup- ported by the DV-CP701

43