Onkyo DR-S501 instruction manual Connecting Antenna, Connecting the Indoor FM Antenna

Page 19

Connecting the DVD receiver—Continued

Connecting Antenna

This section explains how to connect the supplied indoor FM antenna and AM loop antenna, and how to connect commercially available outdoor FM and AM antennas.

The DVD receiver won’t pick up any radio signals with- out any antenna connected, so you must connect the antenna to use the tuner.

AM antenna push terminals

FM antenna connector

Connecting the Indoor FM Antenna

The supplied indoor FM antenna is for indoor use only.

1Attach the FM antenna, as shown.

Insert the plug fully into the jack.

Once your DVD receiver is ready for use, you’ll need to tune into an FM radio station and adjust the position of the FM antenna to achieve the best possible reception.

2Use thumbtacks or something similar to fix the FM antenna into position.

Thumbtacks, etc.

Caution: Be careful that you don’t injure yourself when using thumbtacks.

If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available out- door FM antenna instead (see page 20).

Connecting the AM Loop Antenna

The supplied indoor AM loop antenna is for indoor use only.

1Assemble the AM loop antenna, inserting the tabs into the base, as shown.

2Connect both wires of the AM loop antenna to the AM antenna push termi- nals, as shown.

The antenna connection is polarity sensitive. Con- nect the black wire to the ground terminal ( ). Connect the other wire to the other terminal. Make sure that the wires are attached securely and that the push terminals are gripping the bare wires, not the insulation.

Push

 

 

 

 

Insert wire

Release

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Black

Once your DVD receiver is ready for use, you’ll need to tune into an AM radio station and adjust the position of the AM antenna to achieve the best possible reception.

Keep the antenna as far away as possible from your DVD receiver, TV, speaker cables, and power cords.

If you cannot achieve good reception with the supplied indoor AM loop antenna, try using it with a commer- cially available outdoor AM antenna (see page 20).

19

Image 19
Contents Overview Connections DR-S501Batteries Important Safety InstructionsPower PrecautionsInstalling this Unit For European Models PrecautionsMake sure you have the following accessories Supplied AccessoriesIntroduction FeaturesContents Function Support IntroductionDisc Notes Supported DiscsDivX video compatibility MP3/WMA/JPEG CompatibilityAbout WMA About DivXCopyright Cleaning DiscsHandling Discs Storing DiscsInstalling the Batteries Before Using the DVD receiverUsing the Remote Controller Front Panel Front & Rear PanelsDisplay Front & Rear PanelsVideo 1 Input AV Connector European model onlyRear Panel  Hdmi IN/OUTRemote Controller Mode button Resolution buttonTuner buttons Tuning / button Preset / buttonsConnecting Your Speakers Connecting the DVD receiverPlacing the Speakers Speaker Impedance Connecting the DVD receiverConnecting the Speaker Cables Connecting a Powered SubwooferAttach the FM antenna, as shown Connecting AntennaConnecting the Indoor FM Antenna Connecting the AM Loop AntennaConnecting an Outdoor AM Antenna Connecting an Outdoor FM AntennaUsing a TV/FM Antenna Splitter AV Cables & Connectors Video Signal Flow Chart Video Output/Video Setting MatrixOptical Digital Jacks Basic SetupBefore Making Any Connections RCA AV Connection Color CodingCompatibility of this unit with progressive-scan TVs Connecting Your TV video connectionUsing Component Video Using Scart European model onlySet top box Connecting Other AV ComponentRecorder Digital Audio Connection Connecting an RI DockVideo What is HDMI?Using Hdmi Hdmi & the DVD receiverStandby indicator Connecting the Power/Turning on the DVD receiverBefore connecting DVD receiver turns on and the Standby indicator turns offButtons to select TV Shape Initial SetupFirst Time Setup Use the Up and DownSetting the Hdmi Hdmi and Progressive SettingsSelecting Progressive or Interlaced Selecting the Input Source Adjusting the VolumeUsing Headphones Understanding Common OperationsUnderstanding Common Operations Using the Sleep TimerAdjusting Subwoofer Level Remote controller Press the Muting buttonPlaying Discs Starting, Pausing & Stopping PlaybackSelect Playing DiscsSelect Next & Previous track/chapter Stop To stop playback, press the StopTo resume normal playback, press Play button This section explains how to fast forward and reverseForward Frame-by-Frame Playback Fast Forward & ReverseNavigating CDs & Super Audio CDs Navigating DVD & VCD Disc MenusNavigating MP3, WMA & DivX Discs Viewing a Slideshow of Jpeg Images Listening to the Radio Using the TunerTuning into Radio Stations Listening to the RadioListening to the Radio Presetting AM/FM StationsSelecting Presets Deleting PresetsRT Radio Text Using RDS European models onlyWhat is RDS? PS Program ServiceAbout the Listening Modes Using the Listening ModesSelecting Pure Audio Listening Mode on the DVD receiver Selecting Listening ModesPress and hold the Setup but Ton for 3 seconds Using the Listening ModesTheater-Dimensional Listening Angle Setting Listening Mode and Receiver SettingsPress the Play or Enter Advanced PlaybackPress the Search button This is what appears for CDsUse the number buttons to enter a time Advanced PlaybackSearching by Time During playback, press the Search button twiceRepeat Playback To cancel A-B repeat playback, press the A-B buttonRepeat A- appears onscreen and -RA appears on the display SACD, VCD, CD Disc Random, Ran- dom Off Random PlaybackRandom playback may not work with some discs Adding New Items to the List Memory PlaybackDeleting Items from the List Last MemoryEditing Steps Press the Zoom again repeat- edly to Zoom ZoomingSelecting Camera Angles Zoom x1.0 appears onscreenSelecting Subtitles Selecting SoundtracksInput Information Disc and Input InformationDisplaying Information Disc InformationControlling a TV Entering Remote Control CodesControlling Other Components Controlling a TV connected to the DVD receiverControlling Other Components Setup Menu Configuring the DVD receiverConfiguring the DVD receiver Crossover Frequency AM Frequency Step Setup not European modelsAudio Input Setup Digital Input Signal FormatsLanguage DVD Onscreen Setup MenusMenu Setting Description PicturePress the Enter button to con DVD Onscreen Setup MenusUsing the Onscreen Setup Menus Tons to select the options,TV Shape View ModeHdmi Output Setting Picture MenuVideo Black Level Progressive SettingHD Resolution HD Jpeg ModeDigital/HDMI Audio Out PAL Output SettingScart Output Setting European model only Audio MenuAudio Language Language MenuOn-Screen Language Disc Menu LanguageLanguage Code When you’ve finished, press the Enter buttonUse this list when specifying other languages Selecting Other LanguagesDisplay Menu Tal lock, and then press Operation Setting MenuSetting the Parental Lock Change the Security CodeSacd Priority Contents DVD Priority ContentsDivX Registration DVD-Video regions Resetting the receiverDisc Content Organization Additional informationAdditional information GlossaryMP3, WMA, Jpeg & DivX Files File extension Hdcp High-bandwidth Digital Content ProtectionPAL Phase alternation by line Dynamic rangePower TroubleshootingAudio Video TroubleshootingMake sure the source material is Dolby Digital Disc Playback TunerOthers Connection with External DevicesNo sound from the Hdmi connection Hdmi Status ModeNo picture from the Hdmi connection Displayed ID MessageTuner Section SpecificationsAmplifier Section Video SectionAOC Remote Control Codes ListECE Remote Control Codes ListKEC RCA TV/DVD Combination SSSMemo Memo Onkyo Europe UK Office Onkyo Europe Electronics GmbH