Onkyo Complete Guide to Connecting Your TV with DR-S501 DVD Receiver

Page 24

Connecting the DVD receiver—Continued

Connecting Your TV (video connection)

Connect the DVD receiver directly to your TV. If you connect the DVD receiver through a VCR, TV/VCR combination, or video selector, the picture may be dis- torted because DVD-Video discs are usually copy pro- tected.

Using Component Video

You can use the component video output instead of the standard video out jack to connect this receiver to your TV (or other equipment).

This will provide better quality picture than composite video.

This jack cannot output the signal from composite video input.

Use a component video cable (not supplied) to con- nect the COMPONENT VIDEO OUTPUT jacks to a component video input on your TV (or monitor).

If you connect the component video output to a TV or another component that doesn’t support progressive scanning, be sure to turn off HDMI (see page 30). You can set the component video output to Progressive or Interlaced (see page 30).

TV

COMPONENT

VIDEO IN

Y PBPR

Compatibility of this unit with progressive-scan TVs.

This receiver is compatible with progressive video Macro Vision System Copy Guard.

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DIS- PLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE “STAN- DARD DEFINITION” OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COM- PATIBILITY WITH THIS MODEL 525p AND 625p DVD RECEIVER, PLEASE CONTACT OUR CUS- TOMER SERVICE CENTER.

Using SCART (European model only)

If your TV has a SCART-type AV input, you can use a SCART cable to connect this receiver to your TV. This type of connection carries both the sound and the picture.

Use a SCART cable (not supplied) to connect the AV CONNECTOR to an AV input on your TV.

TV

SCART

This connector can output composite video, or RGB video. The default setting is composite, which should work with all TVs. Consult the manual that came with your TV to see if you can use one of the higher quality settings. See page 62 for how to change the video output.

24

Image 24
Contents DR-S501 Overview ConnectionsImportant Safety Instructions BatteriesPrecautions PowerInstalling this Unit Precautions For European ModelsSupplied Accessories Make sure you have the following accessoriesFeatures IntroductionContents Introduction Disc NotesSupported Discs Function SupportMP3/WMA/JPEG Compatibility About WMAAbout DivX DivX video compatibilityCleaning Discs Handling DiscsStoring Discs CopyrightBefore Using the DVD receiver Installing the BatteriesUsing the Remote Controller Front & Rear Panels Front PanelFront & Rear Panels DisplayAV Connector European model only Rear Panel Hdmi IN/OUT Video 1 InputRemote Controller Resolution button Tuner buttons Tuning / buttonPreset / buttons Mode buttonConnecting the DVD receiver Connecting Your SpeakersPlacing the Speakers Connecting the DVD receiver Connecting the Speaker CablesConnecting a Powered Subwoofer Speaker ImpedanceConnecting Antenna Connecting the Indoor FM AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shownConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaUsing a TV/FM Antenna Splitter AV Cables & Connectors Video Output/Video Setting Matrix Video Signal Flow ChartBasic Setup Before Making Any ConnectionsRCA AV Connection Color Coding Optical Digital JacksConnecting Your TV video connection Using Component VideoUsing Scart European model only Compatibility of this unit with progressive-scan TVsConnecting Other AV Component Set top boxRecorder Connecting an RI Dock Digital Audio ConnectionWhat is HDMI? Using HdmiHdmi & the DVD receiver VideoConnecting the Power/Turning on the DVD receiver Before connectingDVD receiver turns on and the Standby indicator turns off Standby indicatorInitial Setup First Time SetupUse the Up and Down Buttons to select TV ShapeHdmi and Progressive Settings Setting the HdmiSelecting Progressive or Interlaced Adjusting the Volume Using HeadphonesUnderstanding Common Operations Selecting the Input SourceUsing the Sleep Timer Adjusting Subwoofer LevelRemote controller Press the Muting button Understanding Common OperationsStarting, Pausing & Stopping Playback Playing DiscsPlaying Discs Select Next & Previous track/chapterStop To stop playback, press the Stop SelectThis section explains how to fast forward and reverse Forward Frame-by-Frame PlaybackFast Forward & Reverse To resume normal playback, press Play buttonNavigating DVD & VCD Disc Menus Navigating CDs & Super Audio CDsNavigating MP3, WMA & DivX Discs Viewing a Slideshow of Jpeg Images Using the Tuner Tuning into Radio StationsListening to the Radio Listening to the RadioPresetting AM/FM Stations Selecting PresetsDeleting Presets Listening to the RadioUsing RDS European models only What is RDS?PS Program Service RT Radio TextUsing the Listening Modes Selecting Pure Audio Listening Mode on the DVD receiverSelecting Listening Modes About the Listening ModesUsing the Listening Modes Theater-Dimensional Listening Angle SettingListening Mode and Receiver Settings Press and hold the Setup but Ton for 3 secondsAdvanced Playback Press the Search buttonThis is what appears for CDs Press the Play or EnterAdvanced Playback Searching by TimeDuring playback, press the Search button twice Use the number buttons to enter a timeTo cancel A-B repeat playback, press the A-B button Repeat PlaybackRepeat A- appears onscreen and -RA appears on the display Random Playback SACD, VCD, CD Disc Random, Ran- dom OffRandom playback may not work with some discs Memory Playback Adding New Items to the ListLast Memory Deleting Items from the ListEditing Steps Zooming Selecting Camera AnglesZoom x1.0 appears onscreen Press the Zoom again repeat- edly to ZoomSelecting Soundtracks Selecting SubtitlesDisc and Input Information Displaying InformationDisc Information Input InformationEntering Remote Control Codes Controlling Other ComponentsControlling a TV connected to the DVD receiver Controlling a TVControlling Other Components Configuring the DVD receiver Setup MenuConfiguring the DVD receiver AM Frequency Step Setup not European models Audio Input SetupDigital Input Signal Formats Crossover FrequencyDVD Onscreen Setup Menus Menu Setting DescriptionPicture LanguageDVD Onscreen Setup Menus Using the Onscreen Setup MenusTons to select the options, Press the Enter button to conView Mode Hdmi Output SettingPicture Menu TV ShapeProgressive Setting HD ResolutionHD Jpeg Mode Video Black LevelPAL Output Setting Scart Output Setting European model onlyAudio Menu Digital/HDMI Audio OutLanguage Menu On-Screen LanguageDisc Menu Language Audio LanguageWhen you’ve finished, press the Enter button Use this list when specifying other languagesSelecting Other Languages Language CodeDisplay Menu Operation Setting Menu Setting the Parental LockChange the Security Code Tal lock, and then pressDVD Priority Contents Sacd Priority ContentsDivX Registration Resetting the receiver Disc Content OrganizationAdditional information DVD-Video regionsGlossary Additional informationMP3, WMA, Jpeg & DivX Files Hdcp High-bandwidth Digital Content Protection PAL Phase alternation by lineDynamic range File extensionTroubleshooting PowerAudio Troubleshooting VideoMake sure the source material is Dolby Digital Tuner Disc PlaybackConnection with External Devices OthersHdmi Status Mode No picture from the Hdmi connectionDisplayed ID Message No sound from the Hdmi connectionSpecifications Amplifier SectionVideo Section Tuner SectionRemote Control Codes List AOCRemote Control Codes List ECEKEC RCA SSS TV/DVD CombinationMemo Memo Onkyo Europe Electronics GmbH Onkyo Europe UK Office