Arcam DV29 manual Technical specifications, Continual improvement policy

Power Requirements

100/115V or 230V AC,

set by voltage selector switch on rear panel

Power consumption

< 35 VA

Dimensions

430mm x 85mm x 345mm

Weight

net: 6.7kg; packed: 11.0kg

Video outputs

Composite video

1 x gold plated phono. 1V pk-pk in 75Ω

S-Video

1 x 4-pin mini-DIN. Y 1V pk-pk in 75Ω, C 0.3V pk-pk in 75Ω

Component video

Interlaced or Progressive

3 gold plated phono sockets.

Y 1V pk-pk in 75Ω, Pb 0.7V pk-pk in 75Ω, Pr 0.7V pk-pk in 75Ω

SCART socket with RGB video

All 0.7V in 75Ω, composite video 1V in 75Ω, and stereo audio

Auto switching of TV with aspect ratio control

HDMI

19-pin HDMI connector

Supported video formats are:

720x576p, 720(1440)x576i, 720x480p, 720(1440)x480i,

audio to 6-channel/96kHz or 2-channel/192kHz (24-bit).

Audio outputs

Analogue audio outputs

Stereo or multi-channel output on gold-plated phono sockets

Output level

2.2V rms at 0dB signal,

4V rms with HDCD discs (left and right channels only)

Frequency response

20Hz to 20kHz (+0.1db, –0.5dB)

THD+N

<0.005% for 1kHz 0dB signal,

measured 22Hz–22kHz, unweighted

Signal-to-noise ratio

105dB, measured 20Hz–20kHz, unweighted

Digital audio output (IEC958)

PCM/Dolby digital/MPEG/DTS on gold plated phono (coax) and

TOSLINK (optical)

Accessories supplied

CR-415 Remote control

2 x AAA batteries

mains lead

E&EO