![](/images/new-backgrounds/1251813/25181355x1.webp)
Status codes
The following status codes are defined:
MSB CODES: |
|
|
n | ‘0’ (0x30): | The DV29 is in |
n Disc loading | ‘1’ (0x31): | A disc is being loaded by the DV29. |
n Tray open | ‘2’ (0x32): | The disc tray is open. |
n No disc | ‘3’ (0x33): | There is no disc in the DV29. |
n Stop | ‘4’ (0x34): | |
n Resume stop | ‘5’ (0x35): | The DV29 is in |
n Play | ‘6’ (0x36): | The DV29 is playing the disc. |
n Pause | ‘7’ (0x37): | The DV29 is in ‘pause’ state. |
n Scanning | ‘8’ (0x38): | Fast/slow forward/rewind in progress. |
LSB CODES: |
|
|
n No menu | ‘@’ (0x40): | No player menu is open (DVD menus may be open). |
n Setup | ‘A’ (0x41): | The |
n Programme | ‘B’ (0x42): | The programme menu of the DV29 is open. |
n Bookmark | ‘C’ (0x43): | The bookmark menu of the DV29 is open. |
n Search | ‘D’ (0x44): | The search menu of the DV29 is open. |
n Trim | ‘E’ (0x45): | The trim menu of the DV29 is open. |
n PLII | ‘F’ (0x46): | The Pro Logic II menu of the DV29 is open. |
Example command and response sequence
As an example, the command to be set the
STR | CC | P1 | P2 | ETR |
! | + | 1 | ~ | (0xD) |
Assuming that the command was accepted by the DV29, the DV29 shall respond to this command with the following sequence:
STR | RC | AC | P1 | P2 | P3 | ETR |
! | + | @ | 1 | ~ | ~ | (0xD) |
DV29