![](/images/new-backgrounds/1251813/25181357x1.webp)
Command Specifications / Spécifications des commandes / Befehlsspezifikationen / Opdrachtspecificaties
Power / Alimentation / Betriebsbereitschaft / Stroom
Change the
Permet de modifier l’état de veille du DV29.
Ändern des
De
Example / Exemple / Beispiel / Voorbeeld
Command/response sequence to bring the DV29 out of standby:
Séquence commande/réponse pour désactiver le mode veille du DV29 :
Opdracht- en responsreeks om de DV29 uit
COMMAND: !*1~ – followed by/suivie d’un/gefolgt von/gevolgd door (0xD)
RESPONSE: !*A1~~ – followed by/suivie d’un/gefolgt von/gevolgd door (0xD)
COMMAND:
Byte: | Description: |
|
|
|
|
CC | ‘*’ (0x2A) (Command code) |
|
|
|
|
P1 | ‘0’ (0x30) – Enter | English |
P2 | ‘~’ (0x7E) – (Reserved) | |
| ‘1’ (0x31) – |
|
| ‘Q’ (0x51) – Request power state |
|
|
|
|
RESPONSE: |
| |
|
|
|
Byte: | Description: |
|
|
|
|
RC | ‘*’ (0x2A) (Reply Code) |
|
|
|
|
AC | Answer code |
|
|
|
|
P1 | Response to the ‘Request power state’: |
|
| ‘0’ (0x30) – DV29 is in standby |
|
| ‘1’ (0x31) – DV29 is powered on |
|
| Otherwise: |
|
| ‘~’ (0x7E) – (Reserved) |
|
|
|
|
P2 | ‘~’ (0x7E) – (Reserved) |
|
|
|
|
P3 | ‘~’ (0x7E) – (Reserved) |
|
|
|
|
Display Control / Contrôle de l’affichage /
Steuerung des Displays / Bediening display
Allows the brightness of the
Permet de modifier la luminosité de l’affichage du panneau avant.
Hiermit können Sie die Helligkeit des Displays an der Gerätevorderseite ändern.
Hiermee kan de helderheid op het display aan de voorkant gewijzigd worden.
Example / Exemple / Beispiel / Voorbeeld
: Command/response sequence to change the brightness of the display to ‘off’
: Séquence commande/réponse pour désactiver la luminosité de l’affichage :
Opdracht- en responsreeks om de helderheid van het display op ‘off’ te zetten:
COMMAND: !+0~ – followed by/suivie d’un/gefolgt von/gevolgd door (0xD)
RESPONSE: !+@0~~ – followed by/suivie d’un/gefolgt von/gevolgd door (0xD)
COMMAND:
Byte: | Description: | |
|
| |
CC | ‘+’ (0x2B) (Command code) | |
|
|
|
P1 | ‘0’ (0x30) | – Set the display to off |
| ‘1’ (0x31) | – Set the display to dimmed |
| ‘2’ (0x32) | – Set the display bright |
| ‘Q’ (0x51) – Request the display brightness | |
|
| |
P2 | ‘~’ (0x7E) – (Reserved) | |
|
|
|
RESPONSE:
Byte: | Description: | |
|
| |
RC | ‘+’ (0x2B) (Reply Code) | |
|
| |
AC | Answer code | |
|
|
|
P1 | ‘0’ (0x30) | – The display is off |
| ‘1’ (0x31) | – The display is dimmed |
| ‘2’ (0x32) | – The display is bright |
|
| |
P2 | ‘~’ (0x7E) – (Reserved) | |
|
| |
P3 | ‘~’ (0x7E) – (Reserved) | |
|
|
|
DV29