Linn UNIDISK SC PLAYER owner manual General Setup, Ntsc Type, Aspect Ratio, Video Standard

General Setup

OSD Language (on-screen display language)

Default setting: English

Choose the language you want on-screen information and menus displayed in.

Setup Menus English

NTSC Type

For countries that use the NTSC signal standard.

Default setting: North American

If in the U.S.A. or Canada, set to North American.

If not in the U.S.A. or Canada, set to World.

Aspect Ratio

Default setting: 16:9

Choose the option that matches your display device; either 4:3, Letterbox or 16:9.

Video Standard

If you have already selected the video signal standard for your TV using the DISP (display) key on the handset (see Video Output section at the start of this chapter), skip this item.

Default setting: Native

Choose the option that matches the video signal standard accepted by your display device. Set to Native

if your display device accepts both NTSC and PAL standards.

Notes:

If Video Standard is set to Native you may notice the screen flicker when a DVD-Video begins to play. This happens when the UNIDISK SC switches from one video signal standard to the other.

If your display device only accepts one type of standard and a PAL to NTSC, or NTSC to PAL conversion is applied, you may notice degradation in the picture quality when viewing DVD-Videos or DVD-Audios that have been recorded in the other standard.

Prim. (Primary) Display Device

Default setting: Interlaced

The UNIDISK SC is able to account for the video delay inherent in the processing required for progressive video signals, thus ensuring that both video and audio signals are output simultaneously. Set this option to suit the main display device in your AV system.

Interlaced Out (this item is not availalble on the Phono version)

Default setting: RGB

Select the video output signal accepted by your display device. If your display device accepts both RGB and YPrPb signals, set to YPrPb as it usually provides better picture quality.

Colour Level (applies to the YPrPb outputs on the Phono version, only)

Default setting: Standard

The Colour Level option adjusts the amount of colour information sent to your display device.

If you want the UNIDISK SC to determine the setting based on the video format of the disc being played, set to Auto.

If your display device accepts a 1 V peak-to-peak input, set to High.

If your display device accepts a 0.7 V peak-to-peak input, set to Standard.

UNIDISK SC PLAYER

9 Owner’s Manual