English User Options
User Options
This chapter explains how you can configure certain functions of the UNIDISK SC to suit your own requirements.
Changing the user options’ settings
T U N E R |
|
|
|
|
|
|
|
|
|
| |
| ALL | ONE | A - B |
|
|
|
|
|
|
|
|
DISP |
|
|
|
|
|
|
|
|
|
|
|
| RANDOM | SHUFFLE | INTRO |
|
|
|
|
|
|
|
|
GOTO |
|
|
|
|
|
|
|
|
|
|
|
| INCLUDE | EXCLUDE | RECORD |
|
|
|
|
|
|
|
|
SURR |
|
|
|
|
|
|
|
|
|
|
|
ADJUST | STORE |
| SHIFT |
|
|
|
|
|
|
|
|
| TV |
|
|
|
|
|
|
|
|
|
|
| TITLE |
| DVD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SELECT |
'enter' |
|
|
|
|
|
|
|
|
|
|
|
| SETUP | RETURN |
|
|
|
|
|
|
|
| |
PRESET | TUNE | SCAN | + |
|
|
|
|
|
|
|
|
|
|
| U | N | I | D | I | S | K | S | C |
SIGNAL | BAND | MONO |
|
|
|
|
|
|
|
| |
+ |
|
|
|
|
|
|
|
|
| ||
AUDIO | ANGLE | ZOOM | |
| ALARM |
|
|
TIMER | WHERE | WHAT | DO |
To access the user options:
●If there is a disc playing in the unit, stop it.
●Hold 
on the front panel until the display shows User Options.
To change the user options’ settings:
●Repeatedly press or hold 
or 
on the handset or front panel to select the required user option.
●Repeatedly press or hold 
or 
to change the setting of the user option.
To restore a user option to its default value:
●Select the required user option.
●Press ‘enter’ on the handset or 
on the front panel.
To save settings and exit the user options:
●Press 
on the handset or 
on the front panel.
UNIDISK SC PLAYER
Table of user options
The following table shows the UNIDISK SC’s user options, describes them and lists the available settings for each. Default settings are shown in bold (and are marked with a ‘*’ on the front panel display).
Option | Description | Settings | |
|
|
|
|
DISPLAY BRIGHTNESS | Allows adjustment to the brightness of the | AUTO | |
| front panel display. When set to AUTO, the | 2% to 100% | |
| unit will select a brightness level based on | ||
| the ambient light level in the room (the |
|
|
| greater the ambient light level, the brighter |
|
|
| the display will be). |
|
|
|
|
|
|
SLEEP DISPLAY DELAY | Sets the number of seconds that the unit is | OFF | |
| inactive for before the sleep display (three | 0m 10s to 5m 00s | |
| dots) is shown on the front panel. | (in 10 sec steps) | |
|
|
|
|
FRONT PANEL IR | If set to ACCEPTED, unit will respond to | ACCEPTED | |
COMMANDS | commands received via the IR receiver on | IGNORED | |
| the front panel. |
|
|
|
|
|
|
ACC SOCKET MODE | Defines the use of the ACC (accessory) | IR | |
| socket. IR = Infrared Repeater, | RCU | |
| RCU = KNEKT Room Control Unit. |
|
|
|
|
|
|
IR OUT MODULATION | Modulation frequency for infrared flasher. | 36 kHz | |
|
| 10 kHz to 2212 kHz | |
|
|
|
|
KNEKT MODE | AUTO is the setting for normal operation and | AUTO | |
| is also for use when the unit is in a KNEKT | MAIN | |
| system and is connected to another UNIDISK | LOCAL | |
| SC, a Linn CLASSIK Movie, | SOURCE | |
| CLASSIK Movie Di, or CLASSIK Music. In this |
|
|
| situation the UNIDISK SC will automatically |
|
|
| configure itself to operate as a Main or Local |
|
|
| Room component. |
|
|
| The MAIN and LOCAL options allow you to |
|
|
| specify whether the unit is a Main or Local |
|
|
| Room component in a KNEKT system. |
|
|
| The SOURCE setting disables the unit’s pre- |
|
|
| amplifier and should be used if the |
|
|
| UNIDISK SC is being used with an external pre- |
|
|
| amplifier or surround sound processor. |
|
|
|
|
|
|
PASS IR TO REMOTE OUT | If set to ENABLED, the unit passes commands | ENABLED | |
(This option will not be | received via the IR receiver on the front panel | DISABLED | |
available if KNEKT MODE | to REMOTE OUT. Will function even if the IR |
|
|
has been set to AUTO, | commands are disabled. |
|
|
MAIN or LOCAL.) |
|
|
|
|
|
|
|
Owner’s Manual | 30 |