Connecting English
Back panel - SCART version
1Mains input
2Power switch
3IR OUT 1 and 2 Infrared flasher connectors. Allow the control via the handset of auxiliary devices that accept infrared signals.
4RS232 IN and OUT For operating the unit via a PC or
5REMOTE IN and OUT For installing the unit in a KNEKT system.
6
7
8TV SCART For connection to the SCART socket on a display device. This connection carries composite or RGB video and
9VCR SCART For connection to the SCART socket on a VCR.
10MAIN RX TX Indicate signals being transmitted between products in a KNEKT system.
11ACC Accessory socket. For installing the UNIDISK SC in a KNEKT system or for connection to an infrared repeater.
12MAIN IN, ROOM
13ROOM RX TX Indicate signals being transmitted between products in a KNEKT system.
14Line output connectors Line outputs for connection to a power amplifier and subwoofer.
15TV OUT Line (fixed) level for connection to a display device with volume controls or to an external
16AUX 1 and 2 Analogue inputs for auxiliary sources.
17DIGITAL IN
18DIGITAL OUT SPDIF and TOSLINK For connection to devices with digital inputs.
Note:
Audio signals from Super Audio CDs and
Before connecting or disconnecting any of the plugs on the back panel, the UNIDISK SC should be disconnected from the power supply. If this is not done you may generate surges which could damage the UNIDISK SC or other components in your AV system.
UNIDISK SC PLAYER
3 | Owner’s Manual |