English Setup Menus
Dolby PL II Mode (Analogue outputs only)
Default setting: Movie
This menu is suitable for use if your UNIDISK SC is connected to front, plus centre and/or surround speakers.
Dolby Pro Logic II creates five output channels from any internal or auxiliary
Dolby PL
This mode recreates the surround processing offered by original Dolby Pro Logic. The Dolby PL setting is suitable if the source material is not of the best quality (for example, a worn VCR tape).
Music
As its name suggests, this mode is recommended when listening to music. If you select Music mode you can adjust certain Dolby Pro Logic II parameters in the Dolby PL II Cntl menu (see opposite).
Movie
This mode is recommended for when watching
Matrix
Matrix mode can be used to enhance mono signals (e.g. AM radio broadcasts) by making them seem “larger”.
UNIDISK SC PLAYER
Dolby PL II Cntl (Control)
If you have selected Music in the Dolby PL II Mode menu, then you are able to enter the Pro Logic II Cntl menus. Highlighting Dolby PL II Cntl and pressing ‘enter’ reveals the first Dolby PL II Cntl screen.
Dimension
Default setting: 0
The Dimension control allows you to shift the balance between the front and surround speakers. Positive values move the sound towards the front, negative values towards the surrounds. If a recording is too spacious or strong from the surround speakers it can be shifted “forward” to get a better balance. A stereo recording can be shifted “backward” to make the sound more enveloping.
Panorama
Default setting: Off
If set to On the Panorama control extends the audio signal from the front left and right speakers, to include the surround left and right speakers. This will add a “wraparound” effect to the sound.
Centre Width
Default setting: 0
This control allows adjustment of the audio signal between the centre speaker and front left and right speakers.
If set to 0, all of the audio signal for the centre channel is sent to the centre speaker.
If set between 1 and 6, a lesser to greater portion of the centre channel signal is also sent to the left and right front speakers.
If set to 7, all of the centre channel signal is split evenly between the front left and right speakers.
To exit Dolby PL II Cntl:
●Select Audio Setup and press ‘enter’.
Owner’s Manual | 14 |