Pre-amplifier English
Subwoofer trim | Balance adjustment |
If you use a subwoofer speaker as part of your AV system, you may find that you want to adjust the volume level of the subwoofer without affecting any of the other speakers. This is achieved by adjusting the subwoofer trim.
Subwoofer trim range is
To adjust the level of subwoofer trim:
●Repeatedly press ADJUST on the handset until the front panel shows the subwoofer trim display.
●To increase the level of trim, repeatedly press or hold 
on the handset.
●To decrease the level of trim, repeatedly press or hold 
.
To exit subwoofer trim adjustment:
●Press DVD on the handset.
or
●Wait a few seconds for the display to change to the disc display.
This function allows you to shift the balance between the left and right speakers.
Balance range is from 10 increments to the left, to 10 increments to the right, with neutral balance being 0.
To shift the balance setting:
●Repeatedly press ADJUST on the handset until the front panel shows the balance display.
●To shift the balance to the right, repeatedly press or hold 
on the handset.
●To shift the balance to the left, repeatedly press or hold 
.
To exit balance adjustment:
●Press DVD on the handset.
or
●Wait a few seconds for the display to change to the disc display.
Auxiliary source selection
To select an auxiliary source:
●Repeatedly press AUX on the handset to cycle through the auxiliary inputs.
To return to Disc mode:
●Press DVD on the handset.
UNIDISK SC PLAYER
29 | Owner’s Manual |