Integra instruction manual Turning On the DPC-8.5 & First Time Setup, Use the Left and Right

Turning On the DPC-8.5 & First Time Setup—Continued

3

Remote controller

Enter

On the Analog Audio Out menu, use the Up and Down []/[ ] buttons to select 2 Channel or Multi Channel (default), and then press [Enter].

Choose 2 Channel if you’re connecting the FRONT AUDIO OUTs to a stereo amp.

Choose Multi Channel if you’re con- necting the FRONT, SURR 1/SURR 2, CENTER, and SUBWOOFER AUDIO OUTs to a multichannel amp.

If you select 2 Channel, the setup is complete and the Initial Setup menu closes. If you select Multi Channel, continue with this procedure.

6 Use the Left and Right []/[ ] Remote controller buttons to set the Front Speaker

setting, and then press the [Enter] button.

	Enter	Large: Select if the front speakers are
		large.
		Small (default): Select if the front
		speakers are small.
		Note that if the Subwoofer setting is set
		to Off, this setting is fixed at Large.
7		Use the Left and Right [ ]/[ ]

Remote controller buttons to set the Center Speaker setting, and then press the [Enter] button.

4 Press the [Enter] button, use the

Remote controller Up and Down []/[ ] buttons to

	select On or Off, and then press
	the [Enter] button.
Enter	Choose Off if your multichannel amp
	has its own speaker setup function.
	Choose On if your multichannel amp
	has no speaker setup function.
	If you select Off, the following settings
	cannot be set and the Initial Setup menu
	closes. If you select On, the Speaker
	Setting menu appears.

Here you can specify the size of the speakers being fed from the FRONT, SURR 1/SURR 2, CENTER, and SUBWOOFER AUDIO OUTPUTs.

For speakers with a cone diameter larger than 6-1/2 inches (16 cm), spec- ify Large. For those with a smaller diameter, specify Small. See page 58 for more information.

5 Press the [Enter] button, use the

Remote controller Left and Right []/[ ] buttons to

	set the Subwoofer setting, and
	then press [Enter] again.
Enter	Off: Select if no subwoofer is being
	used.
	On (default): Select if a subwoofer is
	being used.

	Enter	Large: Select if the center speaker is
		large.
		Small (default): Select if the center
		speaker is small.
		Off: Select if no center speaker is being
		used.
		Note that if the Front Speaker Size is
		set to Small, the Large option cannot be
		selected.
8		Use the Left and Right [ ]/[ ]

Remote controller buttons to set the Surround Speaker setting, and then press the [Enter] button.

Enter	Large: Select if the surround speakers
	are large.
	Small (default): Select if the surround
	speakers are small.
	Off: Select if no surround speakers are
	being used.
	The Initial Setup menu closes and the
	setup is complete.
	The DPC-8.5 is now ready for use. See
	page 29 for information on loading
	discs, and page 30 for information on
	selecting and playing discs.

Notes:

•You can change the language of the onscreen setup menus, and your preferred languages for DVD menus, foreign language soundtracks, and subtitles on the Language page of the onscreen setup menus (see page 62).

•If a DVD doesn’t have menus, soundtracks, and subti- tles in various languages, its default language is used.

28