Integra DPC-8.5 instruction manual Interlaced Setting

Configuring the DPC-8.5—Continued

				A-B
	4	5	6
				Random
	7	8	9
				Display
	+10	0	Clear
	Top Menu			Menu
Enter		Enter
/
	Return			Setup
				Setup
	Audio	Angle	Subtitle
	Stop	Play		Pause
	FR	FF	Down	Up
	Disc 1	Disc 2	Disc 3	Step/Slow

Interlaced Setting

With this setting you can adjust various picture parame- ters for interlaced scanning. There are three setup mem- ories (1, 2, 3) for storing your favorite settings. You could, for example, use one for daytime viewing (e.g., sun shining through window) and one for nighttime viewing (e.g., curtains drawn, lights down).

Parameter	Range	Description
Blacker than	Off, On	Makes black objects look
black	(default)	even blacker.
Contrast	–7...0...+7	Adjusts the picture
		contrast.
Brightness	–7...0...+7	Adjusts the picture
		brightness.
Color	–7...0...+7	Adjusts the picture color.
Tint	–7...0...+7	Adjusts the picture tint.
Sharpness	–6...0...+6	Adjusts the picture
		sharpness.
S, Composite	Dark,	Adjusts the black level
	Normal	for the S-Video and
Video
	(default)	composite video outputs.
Component	Dark	Adjusts the black level
	(default),	for the component video
Video
	Light	outputs.
Gamma	–7...0...+7	Adjusts the brightness of
		darker colors.
Y/C Time	–4, –2, 0,	Corrects small shifts in
Correction	+2, +4	color.
DNR	Off (default),
(Digital Noise		Reduces picture noise.1
	1, 2, 3
Reduction)

1.The effect may not always be noticeable, and depending on the video source, the picture may look better with it set to Off.

1

Remote controller

Enter

	Select Interlaced Setting 1, 2, or
	3, and then press the [Enter] or
	Right [ ] button.
	The parameters appear onscreen.
2	Use the Up and Down [ ]/[ ] but-
Remote controller	tons to select the parameters,
	press [Enter], and use the Left
	and Right [ ]/[ ] buttons to set
Enter	them.

3	When you’ve finished, press the
Remote controller	[Enter] button.
	The settings are stored.
Enter	Use the same procedure to set the other
	parameters, pressing [Enter] when
	you’ve set each one.
	Press the [Setup] button to exit the
	onscreen setup menu.

Notes:

•These settings are used only when the Progressive function is off.

55