Controls & Connectors
Front Panel
A B C456 | 7 | 8 9 | J K L |
Standby/On
Last Memory Repeat Dimmer | Display |
Standby
M N
| Open/Close |
|
|
Disc Skip | Chain | Stop | Play |
Pause Mode |
|
|
Enter
OPQR
For detailed information, refer to the pages in parenthesis.
AStandby/On button (21)
This button is used to set the
BStandby indicator (21)
This indicator lights up when the
CLast Memory button (37)
This button is used with the Last Memory function.
DRepeat button (32)
This button is used with the Repeat function.
EDimmer button (30)
This button is used to adjust the display brightness.
FDisplay button (38)
This button is used to display information about the cur- rent disc, title, chapter, or track, including the elapsed time, remaining time, total time, and so on.
GDisplay
See “Display” on page 11 for more information.
HRemote control sensor (15)
This sensor receives control signals from the remote controller.
IOpen/Close button (22)
This button is used to open and close the disc tray.
JChain Mode button (31)
This button is used with the Chain mode function.
KStop button (23)
This button is used to stop playback.
LPlay/Enter button (23)
This button is used to start playback and to cancel fast forward and fast reverse. It’s also used to start Chain mode playback.
MDisc tray (22)
The disc tray has six bays for loading up to six discs.
NDisc tray light
This light illuminates the disc tray. It comes on when the
ODisc Skip button (22, 23)
This button is used to select the disc bays (i.e., rotate the disc tray) when loading or removing discs, and to select discs for playback.
PDown [] button (26, 27, 29)
This button is used to select the previous chapter or track. During playback it selects the beginning of the current chapter or track.
QUp [] button (26, 27, 29)
This button is used to select the next chapter or track.
RPause button (23)
This button is used to pause playback.
10