Integra instruction manual Connecting the DPC-7.4 Connecting Your TV or Projector, Lets

Page 17

Connecting the DPC-7.4—Continued

Connecting Your TV or Projector

This section explains how to connect the DPC-7.4 to your TV or projector.

In this hookup example, the TV handles the audio and video. If your TV has a Dolby Pro Logic decoder built-in, you’ll be able to enjoy DVDs and videos that bear the Dolby Surround logo.

To enjoy Dolby Digital or DTS (5.1-channel surround), you’ll need a compatible decoder (see page 18).

The DPC-7.4 has three types of video output: component video, S-Video, and composite video. Component video offers the best picture quality, so if your TV supports it, use a commercially available component video cable to connect the DPC-7.4’s COMPONENT video output to the compo- nent video inputs on your TV. If your TV supports progres- sive scanning, you must use component video in order to take advantage of that feature.

TV or projector

L

IN

R

Y

INPUT

VIDEO IN

S VIDEO IN

ANALOG

 

(red)

PB

S-Video offers better picture quality than composite video, so if your TV supports it, use the supplied S-Video cable to connect the DPC-7.4’s S VIDEO output to an S-Video input on your TV. Failing that, use the supplied composite video cable to connect the DPC-7.4’s VIDEO output to a composite video input on your TV.

1

Turn off the DPC-7.4 and your TV, and dis-

 

connect their power cords from the wall out-

 

lets.

 

 

2

Connect the DPC-7.4 to your TV as shown.

 

 

3

When you’ve completed all connections, see

 

“Powering Up & Setting Up the DPC-7.4” on

page 21.

*1 The DPC-7.4 has two composite video out- put connectors and two pairs of stereo ana- log audio output connectors. They output the same video and audio signals respectively.

*2 The DPC-7.4 has two S-Video output con- nectors. They output the same video signal.

*3 The DPC-7.4 has two component video out- puts. The COMPONENT 1 output uses RCA/phono connectors. The COMPO- NENT 2 output uses BNC connectors. They output the same video signal.

(white)

(yellow)

PR

AV RCA/phono cable (supplied)*1

(red)

(white)

Component video cable*3

S-Video cable

 

(supplied)*2

Signal flow

 

Only one connection required!

 

Choose component video,

(yellow)

S-Video, or composite video.

 

 

 

VIDEO OUTPUT

 

 

 

 

COMPONENT 2

 

 

 

 

Y

 

PB

PR

 

 

 

 

 

 

 

 

 

DVD CHANGER

 

 

 

 

AUDIO OUTPUT

MODEL NO. DPC-7.4

 

COMPONENT 1

 

RS 232

 

S VIDEO

DIGITAL

 

Y

PB

PR

OPTICAL

COAXIAL

AC INLET

 

 

 

 

 

 

AUDIO OUTPUT

ANALOG

VIDEO

 

L

IN

 

 

IR

 

R

OUT

REMOTE

 

 

CONTROL

Notes

Before making any connections, turn off the DPC-7.4 and your TV and disconnect their power cords from the wall outlets.

Also refer to the connection information supplied with your TV.

Connect the DPC-7.4’s video outputs directly to your TV. Don’t connect a VCR or other video equipment in between your DPC-7.4 and TV. Doing so may result in picture dis- tortion, because of the copy protection system used on DVD-Videos.

When you use the analog audio outputs, don’t play DTS CDs and don’t select DTS soundtracks on DVD-Videos. Doing so will produce unpleasant digital noise, which may damage your equipment.

If your TV or projector has BNC component video inputs, use a BNC component video cable to connect them to the DPC-7.4’s BNC component video outputs.

17

Image 17
Contents DPC-7.4 Contents Important Safety Instructions Sur les modèles dont la fiche est polarisée PrecautionsFor models having a power cord with a polarized plug Precautions Introduction Supplied AccessoriesDPC-7.4 Features Disc Content Organization Unsupported DVD FeaturesIntroduction Disc Notes DVD Region Numbers Supported DiscsIntroduction Cleaning DiscsVideo CDs MP3/WMA/JPEG CompatibilityCopyright DPC-7.4-related TerminologyStoring Discs Front Panel Controls & ConnectorsControls & Connectors Display IR IN/OUT Controls & Connectors Rear PanelControls & Connectors Remote Controller Controls & Connectors Using the Remote Controller Before Using the DPC-7.4Installing the Remote Controller’s Batteries AV Cables & Connectors Connecting the DPC-7.4Before Making Any Connections Optical Digital InputsPowering Up & Setting Up the DPC-7.4 on Connecting the DPC-7.4 Connecting Your TV or ProjectorTurn off the DPC-7.4 and your TV, and dis LetsConnecting for Dolby Digital or DTS Connecting the DPC-7.4 Connecting Your Hi-Fi AmpAnalog Connection Digital ConnectionPlug the supplied power cord into the AC Inlet Connecting the DPC-7.4 Connecting -compatible AV ComponentsConnect the IR receiver to the DPC-7.4 as shown below Controlling the DPC-7.4 When It’s Out of RangeControlling Other Out-of-range AV Components First Time Setup Powering Up & Setting Up the DPC-7.4Powering Up the DPC-7.4 Loading Discs During Playback Basic PlaybackLoading & Removing Discs Selecting Discs Starting, Pausing & Stopping PlaybackBasic Playback Basic Playback Video CD Navigating Disc MenusLoad and select a DVD-Video or Use the number buttons to specify a chapter or title Selecting Titles & Chapters by NumberPress the Play or Enter button To start playback of the specifiedUsing the Disc Navigator With the Disc Navigator open, press the Memory button Basic Playback Memory Playback in the Disc NavigatorPlaylist appears in place of the file information To start memory playback, press the Play buttonFast Forward & Reverse Selecting Tracks by NumberFrame-by-Frame Playback Adjusting the Display BrightnessSlow-motion Playback Using Chain Mode Using Jpeg CDsRepeat Playback Advanced PlaybackLocating Specific Points in Time Random Playback Advanced PlaybackMemory Playback Selecting Camera Angles Entire memory list is cleared when the DPC-7.4 is setTo Standby To cycle through the available cam- era anglesSelecting Subtitles Using Progressive ScanningSelecting Languages & Audio Formats During playback, press the Last M button Using Last MemoryLast Memory dialog box appears, as shown Last Memory DisplayStop Play/EnterAdvanced Playback Displaying Information Cancel the information displayDuring playback, press the Dis Press the Display button again toConfiguring the DPC-7.4 Menu Setting Description PictureConfiguring the DPC-7.4 Using the Onscreen Setup MenusPicture Menu TV ShapeProgressive Setting Interlaced SettingPAL Output Setting Australian model only Language Menu Configuring the DPC-7.4 Audio MenuDigital Out Dynamic Range Control Dolby Digital onlyDisplay Menu Screen Saver Operation Setting MenuPause/Still Parental LockInitial Setup Menu Language Code ListAuto Power Off Selecting Other LanguagesTroubleshooting Can’t view Jpeg files? Remote controllerMessage no Play appears on Display? Buttons on the DPC-7.4Component Video Specifications