Integra DPC-7.4 instruction manual Important Safety Instructions

Page 3
PORTABLE CART WARNING
S3125A

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

 

AVIS

RISK OF ELECTRIC SHOCK

 

RISQUE DE CHOC ELECTRIQUE

DO NOT OPEN

 

NE PAS OUVRIR

 

 

 

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Important Safety Instructions

1.Read Instructions – All the safety and operating instructions should be read before the appliance is operated.

2.Retain Instructions – The safety and operating instructions should be retained for future reference.

3.Heed Warnings – All warnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions – All operating and use instructions should be followed.

5.Water and Moisture – Do not use the appliance near water –for example, near a bath tub, wash bowl, kitchen sink, or laun- dry tub; in a wet basement; or near a swimming pool; and the like.

6.Cleaning – Unplug the appliance from the wall outlet before cleaning. The appliance should be cleaned with a dry cloth or only as recommended by the manufacturer.

7.Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the appliance and to protect it from overheating, and these openings must not be blocked or covered. Do not use the appliance on a bed, sofa, rug, or other such surface. Newspapers, table clothes, curtains, and other items can inadvertently block ventilation slots. Do not place the unit near curtains that could obstruct the ventila- tion. If you install the appliance in a built-in installation, such as a bookcase or rack, ensure that there is adequate ventilation. Leave 20 cm (8") of free space at the top and sides and 10 cm (4") at the rear. The rear edge of the shelf or board above the appliance should be set 10 cm (4") away from the rear panel or wall, creating a flue-like gap for warm air to escape.

8.Heat – The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appli- ances (including amplifier) that produce heat.

9.Grounding or Polarization – The appliance may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety pur- pose of the polarized or grounding-type plug.

A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Power-Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

11.Attachments – Do not use attachments not recommended by the appliance manufacturer as they may cause hazards.

Accessories – Do not place the appliance on an unstable cart, stand, tripod, bracket, or table. The appliance may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the appliance. Any mounting of the appliance

should follow the manufacturer’s

instructions, and should use a mounting accessory recommended by the manufacturer.

12. An appliance and cart combination should be moved with care to avoid injury from tip-over.

Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

13.Lightning – For added protection for the appliance during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and discon- nect the antenna or cable system. This will prevent damage to the appliance due to lightning and power-line surges.

14.Servicing – Do not attempt to service the appliance yourself as opening or removing covers may expose you to dangerous volt- age or other hazards. Refer all servicing to qualified service personnel.

Damage Requiring Service – Unplug the appliance from the wall outlet and refer servicing to qualified service personnel under the following conditions:

A.When the power-supply cord or plug is damaged,

B.If liquid has been spilled, or objects have fallen into the appliance,

C.If the appliance has been exposed to rain or water,

D.If the appliance does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to its normal operation,

E.If the appliance has been dropped or damaged in any way, and

F.When the appliance exhibits a distinct change in perfor- mance – this indicates a need for service.

15.Object and Liquid Entry – Never push objects of any kind into the appliance through openings as they may touch danger- ous voltage points or short-out parts that could result in a fire or electric shock.

The appliance should not be exposed to dripping or splashing and no objects filled with liquids, such as vases should be placed on the appliance.

Don’t put candles or other burning objects on top of this unit.

16.Batteries – Always consider the environmental issues and fol- low local regulations when disposing of batteries.

3

Image 3
Contents DPC-7.4 Contents Important Safety Instructions Precautions For models having a power cord with a polarized plugSur les modèles dont la fiche est polarisée Precautions Supplied Accessories DPC-7.4 FeaturesIntroduction DVD Region Numbers Supported Discs Unsupported DVD FeaturesDisc Content Organization Introduction Disc NotesMP3/WMA/JPEG Compatibility Cleaning DiscsIntroduction Video CDsDPC-7.4-related Terminology Storing DiscsCopyright Front Panel Controls & ConnectorsControls & Connectors Display IR IN/OUT Controls & Connectors Rear PanelControls & Connectors Remote Controller Controls & Connectors Before Using the DPC-7.4 Installing the Remote Controller’s BatteriesUsing the Remote Controller Optical Digital Inputs Connecting the DPC-7.4AV Cables & Connectors Before Making Any ConnectionsLets Connecting the DPC-7.4 Connecting Your TV or ProjectorPowering Up & Setting Up the DPC-7.4 on Turn off the DPC-7.4 and your TV, and disDigital Connection Connecting the DPC-7.4 Connecting Your Hi-Fi AmpConnecting for Dolby Digital or DTS Analog ConnectionPlug the supplied power cord into the AC Inlet Connecting the DPC-7.4 Connecting -compatible AV ComponentsControlling the DPC-7.4 When It’s Out of Range Controlling Other Out-of-range AV ComponentsConnect the IR receiver to the DPC-7.4 as shown below Powering Up & Setting Up the DPC-7.4 Powering Up the DPC-7.4First Time Setup Basic Playback Loading & Removing DiscsLoading Discs During Playback Starting, Pausing & Stopping Playback Basic PlaybackSelecting Discs Basic Playback Navigating Disc Menus Load and select a DVD-Video orVideo CD To start playback of the specified Selecting Titles & Chapters by NumberUse the number buttons to specify a chapter or title Press the Play or Enter buttonUsing the Disc Navigator To start memory playback, press the Play button Basic Playback Memory Playback in the Disc NavigatorWith the Disc Navigator open, press the Memory button Playlist appears in place of the file informationFast Forward & Reverse Selecting Tracks by NumberAdjusting the Display Brightness Slow-motion PlaybackFrame-by-Frame Playback Using Chain Mode Using Jpeg CDsAdvanced Playback Locating Specific Points in TimeRepeat Playback Random Playback Advanced PlaybackMemory Playback To cycle through the available cam- era angles Entire memory list is cleared when the DPC-7.4 is setSelecting Camera Angles To StandbyUsing Progressive Scanning Selecting Languages & Audio FormatsSelecting Subtitles Last Memory DisplayStop Play/Enter Using Last MemoryDuring playback, press the Last M button Last Memory dialog box appears, as shownPress the Display button again to Cancel the information displayAdvanced Playback Displaying Information During playback, press the DisConfiguring the DPC-7.4 Menu Setting Description PictureTV Shape Using the Onscreen Setup MenusConfiguring the DPC-7.4 Picture MenuInterlaced Setting PAL Output Setting Australian model onlyProgressive Setting Dynamic Range Control Dolby Digital only Configuring the DPC-7.4 Audio MenuLanguage Menu Digital OutDisplay Menu Parental Lock Operation Setting MenuScreen Saver Pause/StillSelecting Other Languages Language Code ListInitial Setup Menu Auto Power OffTroubleshooting Display? Buttons on the DPC-7.4 Remote controllerCan’t view Jpeg files? Message no Play appears onComponent Video Specifications