Samsung SV-DVD640 manual Tuning Your Television for, Setting the Date and Time

Page 10
orbuttons to increase or decrease

Tuning Your Television for the

DVD-VCR

It is only necessary to tune your DVD-VCR if you are not using a SCART.

To view pictures from your DVD-VCR when a Scart cable is used, the television must be set to the audio/video mode (AV).

1Switch on the television.

2Switch on the DVD-VCR by pressing STANDBY/ON on the front of the DVD-VCR or STANDBY/ON on the remote control.

3Select a programme position on the television to be reserved for use with your DVD-VCR.

4Insert the video cassette in the DVD-VCR. Check that the DVD-VCR starts reading the cassette;

if not, press II button.

5Start a scan on your television or set the television to UHF channel 36.

6Fine tune the television until the pictures and sound are obtained clearly.

7If you cannot find the pictures and sound, or there is interference from nearby channels, it may be necessary to change the setting of the DVD-VCR output channel (see Setting the DVD-VCR Output Channel on page 14 and Problems and Solutions on page 45).

8When the picture and sound are perfectly clear, store this channel at the desired programme position on the television.

Result: That programme is now reserved for use with your DVD-VCR.

Setting the Date and Time

Your DVD-VCR contains a 24-hour clock and calendar used to:

Automatically stop programme recording

Preset your DVD-VCR to record a programme automatically

You must set the date and time when:

You purchase the DVD-VCR

The time and date are set automatically from the broadcast signal. If the signal is weak or ghosting occurs, the time and date may not be set automatically.

In this case, they should be set manually.

Do not forget to reset the time when you change clocks from winter to summer time and vice versa.

1After pressing the MENU, press the OK or . Result: The Setup menu is displayed.

2 Press the corresponding

,buttons to select

the Clock option.

 

3Press the OK or to select this option. Result: The Clock Set menu is displayed.

Clock Set

Time

Date

Year

12 : 00

1 / JAN /

2004 THU

4Press or to select the hour, minutes, day, month and year.

Result: The option selected highlight.

5 Press the the value.

Result: The day of the week is displayed automatically.

You can hold the orbuttons down to scroll

 

more quickly through the values.

6On completion, press RETURN to exit the menu.

ENG-9

Image 10
Contents SV-DVD640 Remote Control Overview Contents Safety Instructions Following illustrations represent precautionsAudio Disc Type and CharacteristicsCharacteristics VideoFront View of the DVD-VCR AccessoriesRear View of the DVD-VCR Timer Recording is programmed or in progress Display IndicatorsInserting Batteries in the Remote Control DVD Deck is active DVD, VCD, CD or Svcd is loadedConnect the coaxial cable as indicated on By means of RF Coaxial CablePlug & Auto Set up AV2 in By means of 21-pin Scart CableTuning Your Television for Setting the Date and TimeSelect Language Setting the Menu LanguageOpen Menu Set menu LanguageSee Presetting the Stations ManuallyInstall option DVD-VCR then searches for the second station and so on13 To...Then Clearing a Preset StationIf you Then Selecting the RF OUT Sound Mode B/G-D/K Changing the Preset Station TableSame time on the television screen CH21 .. CH36 .. CH69 Setting the DVD-VCR Output ChannelSelecting the Colour Mode Black and WhiteIntelligent Picture Control Press OK or ❿, untilScreen Messages ShowView Extend Auto Power offOn completion, press Return twice to exit the menu Repeat Play Selecting the Cassette TypeProtecting a Recorded Cassette Recording a Programme with Automatic Stop Switch on the televisionRecording a Programme Immediately To stop recording, press onceUp to six programmes can be preset Using the ShowView FeatureBefore presetting your DVD-VCR Check that the date and time are correctModifying ShowView Programming If you wish to ThenYou can check your preset recordings Using the Timer Programming FeatureChecking a Preset Recording Speed Select recording speedsSelecting the Audio Output Mode Cancelling a Preset RecordingAdjusting Picture Alignment Manually Playing a CassettePlaying a Sequence at Variable Speeds Playing a Cassette in Slow MotionPlaying a Sequence Frame by Frame You can play a cassette in slow motionEnd Search Go To 00000 StopIntro Scan Index Skip Search Using the Tape CounterTo cancel an Index search simply press the ❿II or button Tape counterConnecting an RCA Audio/Video Input Cable Using the Assemble Edit FunctionBrand Codes Brand Codes Using the TV Buttons on the Remote ControlRecoding from Another VCR or Camcorder Button FunctionDigital Audio out Jack Choosing a ConnectionVCR out can not watch by this connection OK or ❿ buttonOK or ❿button Setting Up the Language FeaturesWith the unit in Stop mode, press the Menu button Press the ,❷ buttons to select EnglishMPEG-2 Digital Out Setting Up the Audio OptionsDolby Digital Out Dynamic CompressionBlack Level Setting Up the Display OptionsTV Aspect Ntsc Disc OutputThere are up to 8 rating levels on a disc Setting Up the Parental ControlAbout the Change Password Press the OK or ❿ buttonReceiver Connections Special Playback Features Before You BeginIf you are using a 169 TV Adjusting the Aspect Ratio EZ ViewTo play back using aspect ratio DVD If you are using a 43 TVUse the , ❿ buttons to make the desired setup Using the Display FunctionWhen Playing a DVD/CD To make the screen disappear, press the INFO. button againChanging the Camera Angle Using the Angle buttonUsing the Subtitle button DVD disc can contain up to 32 subtitle languagesUsing the Audio button When playing a DVDRepeat Play Selecting the Audio Language Recalling a Marked Scene Using the Mark Function MP3/WMA PlayUsing the Mark Function DVD/VCD Clearing a MarkCD-R MP3/WMA discs Program/Random playbackYour MP3 or WMA files should be ISO 9660 or Joliet format Random Play CD/MP3/WMA Program Play & Random Play Picture CD PlaybackProgram Play CD/MP3/WMA Return to the Album ScreenCD-R Jpeg Discs Press the button once to stop playback DivX/XviD/MPEG4 Special Playback FeaturesZoom MPEG4 Supported DivX/XviD/MPEG4 Feature TableDivX/XviD/MPEG4 Playback MPEGs containing DivX can be divided into Video and AudioInput Technical SpecificationsGeneral OutputProblems and Solutions VCR Problem Explanation/SolutionBefore requesting service troubleshooting Troubleshooting Guide DVDProblem Action Ellas Greece ZhmivaapovÚ se autovto proiovn pou proevrcetai