Cancelling a Preset Recording
You can cancel any programmes that are:
◆Incorrect
◆No longer required
1Press TIMER on the remote control. Result: The Timer Method is displayed.
2Press the OK button to select Standard option. Result: The TIMER PROGRAMMING menu is
displayed.
3Select the programme to be cancelled by pressing
the | or❷ buttons. |
4Press the CLEAR button to cancel the selected programme.
Result: All the recording information is deleted and
the broadcast will not be recorded.
5On completion, press RETURN twice.
Playing a Cassette
This function allows you to play back any
1Switch on both the television and your DVD-VCR.
2Insert the video cassette to be played. If the safety tab on the cassette is intact, press ❿ll. Otherwise, the cassette is played automatically.
➢When a cassette is loaded, the tape position is optimized automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached, the cassette is rewound automatically.
NTSC tapes can be played back but cannot be recorded with this
3 To... | Then press... | |||
| Stop the playback | ■ (STOP). | ||
| Eject the cassette |
|
| (EJECT). |
|
|
|
|
|
Adjusting Picture Alignment Manually
The Picture Adjustment feature allows you to adjust the alignment manually to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust alignment manually by pressing the TRK buttons until the picture is clear and stable.
Result: ◆ The tracking bar appears.
◆The image is adjusted.
◆The tracking bar disappears when you release the button.
Selecting the Audio Output Mode
You can select the mode in which the sound is reproduced on the loudspeakers and AV outputs. The following options are available.
OptionDescription
LUsed to listen to the sound on the left
RUsed to listen to the sound on the right
MIX | Used to listen to the mixed sound of the |
| |
|
|
MONO | Used to listen to the sound on the normal |
| mono channel. |
|
|
L R Used to listen to
➢When playing back tapes recorded in
To select the sound mode, simply press the AUDIO button on the remote control until the required option is displayed.
| L |
|
|
| R |
|
|
| MIX |
| ||
| L R | MONO |
| |||||||||
|
|
|
|
|
|
| ||||||
|
|
|
|
| ||||||||
|
|
|
|
|
|
|