Samsung SV-DVD640 Recording a Programme Immediately, Recording a Programme with Automatic Stop

Page 19

Recording a Programme

Immediately

Before recording a programme, you must have preset the corresponding station (unless you are recording via an external video source). If you have not done so, refer to pages 10 and 11.

1Switch on the television.

2To monitor the programme being recorded, select the television channel reserved for use with your DVD-VCR (or the AV input if used).

3Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape.

Result: The DVD-VCR is switched on automatically.

4Select:

◆The station to be recorded using the PROG ( or ) buttons

or

◆The AV1, AV2 or AUX source using the INPUT SEL. button for a satellite tuner or external video source

Result: The station number is displayed and the programme can be seen on the television.

5Select the recording speed by pressing the SPEED button as many times as required (see page 17).

6Hold REC (●) down for a while to start recording. Result: The record indicator appears on the

television and DVD-VCR display. An index is recorded on the tape (see page 26).

7To stop recording, press ■ once.

➢◆ If your DVD-VCR ejects the cassette when you start recording, check to make sure that the cassette’s safety tab is intact or that the opening (created by a broken safety tab) is covered with adhesive tape.

◆If you reach the end of the tape while recording, the cassette rewinds automatically.

Recording a Programme with Automatic Stop

This function enables you to record up to nine hours (LP) of programmes.

Your DVD-VCR stops automatically after the requested length of time.

1Switch on the television.

2To monitor the programme being recorded, select the television channel reserved for use with your DVD-VCR (or the AV input if used).

3Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape. Result: The DVD-VCR is switched on automatically.

4Select:

◆The station to be recorded using the PROG

( or ) buttons or

◆The AV1, AV2 or AUX source using the INPUT SEL. button for a satellite tuner or external video source

Result: The channel number is displayed and the programme can be seen on the television.

5Select the recording speed by pressing the SPEED button as many times as required (see page 17).

6Hold the REC button (●) down for a while to start recording.

Result: The record indicator appears on the television screen and DVD-VCR display. An index is recorded on the tape.

7Press the REC button (●) several times to increase the recording time in:

◆30-minute intervals up to four hours

◆1-hour intervals up to nine hours

Result: The length is displayed on the television displays. The selected programme is recorded for the length of time requested. At the end of that time, the DVD-VCR stops recording automatically and power off.

8If you wish to cancel the recording before the end, press STANDBY/ON.

☛If the end of the tape is reached while recording:

◆The recording stops and power off.

☛This function is not available in DVD recording

LENGTH 2:30

SET LENGTH :

PRESS REC ●

ENG-18

Page 18 Page 20
Image 19
Page 18 Page 20
Contents SV-DVD640 Remote Control Overview Contents Following illustrations represent precautions Safety InstructionsVideo Disc Type and CharacteristicsCharacteristics AudioFront View of the DVD-VCR AccessoriesRear View of the DVD-VCR DVD Deck is active DVD, VCD, CD or Svcd is loaded Display IndicatorsInserting Batteries in the Remote Control Timer Recording is programmed or in progressBy means of RF Coaxial Cable Connect the coaxial cable as indicated onAV2 in By means of 21-pin Scart Cable Plug & Auto Set upSetting the Date and Time Tuning Your Television forSet menu Language Setting the Menu LanguageOpen Menu Select LanguageDVD-VCR then searches for the second station and so on Presetting the Stations ManuallyInstall option See13 To...Then Clearing a Preset StationIf you Then Selecting the RF OUT Sound Mode B/G-D/K Changing the Preset Station TableSame time on the television screen Black and White Setting the DVD-VCR Output ChannelSelecting the Colour Mode CH21 .. CH36 .. CH69Press OK or ❿, until Intelligent Picture ControlScreen Messages ShowView Extend Auto Power offOn completion, press Return twice to exit the menu Repeat Play Selecting the Cassette TypeProtecting a Recorded Cassette To stop recording, press once Switch on the televisionRecording a Programme Immediately Recording a Programme with Automatic StopCheck that the date and time are correct Using the ShowView FeatureBefore presetting your DVD-VCR Up to six programmes can be presetIf you wish to Then Modifying ShowView ProgrammingSpeed Select recording speeds Using the Timer Programming FeatureChecking a Preset Recording You can check your preset recordingsPlaying a Cassette Cancelling a Preset RecordingAdjusting Picture Alignment Manually Selecting the Audio Output ModeYou can play a cassette in slow motion Playing a Cassette in Slow MotionPlaying a Sequence Frame by Frame Playing a Sequence at Variable SpeedsEnd Search Go To 00000 StopIntro Scan Tape counter Using the Tape CounterTo cancel an Index search simply press the ❿II or button Index Skip SearchUsing the Assemble Edit Function Connecting an RCA Audio/Video Input CableButton Function Using the TV Buttons on the Remote ControlRecoding from Another VCR or Camcorder Brand Codes Brand CodesOK or ❿ button Choosing a ConnectionVCR out can not watch by this connection Digital Audio out JackPress the ,❷ buttons to select English Setting Up the Language FeaturesWith the unit in Stop mode, press the Menu button OK or ❿buttonDynamic Compression Setting Up the Audio OptionsDolby Digital Out MPEG-2 Digital OutNtsc Disc Output Setting Up the Display OptionsTV Aspect Black LevelPress the OK or ❿ button Setting Up the Parental ControlAbout the Change Password There are up to 8 rating levels on a discBefore You Begin Receiver Connections Special Playback FeaturesIf you are using a 43 TV Adjusting the Aspect Ratio EZ ViewTo play back using aspect ratio DVD If you are using a 169 TVTo make the screen disappear, press the INFO. button again Using the Display FunctionWhen Playing a DVD/CD Use the , ❿ buttons to make the desired setupDVD disc can contain up to 32 subtitle languages Using the Angle buttonUsing the Subtitle button Changing the Camera AngleUsing the Audio button When playing a DVDRepeat Play Selecting the Audio Language Clearing a Mark Using the Mark Function MP3/WMA PlayUsing the Mark Function DVD/VCD Recalling a Marked SceneCD-R MP3/WMA discs Program/Random playbackYour MP3 or WMA files should be ISO 9660 or Joliet format Return to the Album Screen Program Play & Random Play Picture CD PlaybackProgram Play CD/MP3/WMA Random Play CD/MP3/WMACD-R Jpeg Discs Press the button once to stop playback DivX/XviD/MPEG4 Special Playback FeaturesZoom MPEGs containing DivX can be divided into Video and Audio DivX/XviD/MPEG4 Feature TableDivX/XviD/MPEG4 Playback MPEG4 SupportedOutput Technical SpecificationsGeneral InputProblem Explanation/Solution Problems and Solutions VCRBefore requesting service troubleshooting Troubleshooting Guide DVDProblem Action ZhmivaapovÚ se autovto proiovn pou proevrcetai Ellas Greece
Top Page Image Contents