Samsung SV-DVD640 manual Selecting the Cassette Type, Repeat Play, Protecting a Recorded Cassette

Page 18

Selecting the Cassette Type		Selecting the Recording Speed

If you wish to use the tape counter to display the time remaining on a cassette, you must indicate the type of cassette inserted.

1After pressing the MENU press the corresponding ,❷ buttons to select the VCR option.

2Press the OK or ❿ buttons to select this option. Result: The VCR Setup menu is displayed.

3 Press the corresponding					or❷ buttons, until the
Tape Select option is selected.

					VCR Setup			E180
					VCR Setup			E180
				Tape Select	: E180			E240
				Tape Select	: E180			E240
				Repeat Play	: Off			E260
								E300
								E300

4Press the OK or ❿ buttons as many times as required, until the correct cassette length is displayed.

E180 E240

E 300

E260

5Press RETURN twice to exit the menu.

Repeat Play

You can set repeat play to repeat the tape continuously from beginning to end.

						VCR Setup
				Tape Select	: E180
				Repeat Play	: Off			Off
								On

To...	Press OK or ❿, until...

Repeat play	On is displayed.
Do not wish to repeat play	Off is displayed.

You can record a cassette at two different speeds:

◆SP (Standard Play)

◆LP (Long Play)

In Long Play modes:

◆Each cassette lasts twice as long

◆The recording is of a slightly lower quality.

To record a cassette...		Press the SPEED button on
		the remote control, until...
In standard play mode		SP is displayed.
In long play mode		LP is displayed.


Type	Recording Time (in SP)
E-180	180 mins. or 3 hours

E-240	240 mins. or 4 hours

E-260	260 mins. or 4 hours and 20 mins.

E-300	300 mins. or 5 hours

Protecting a Recorded Cassette

Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape.

1If you wish to protect a cassette, break off the tab using a small screwdriver.

2To re-record over a protected cassette (safety tab broken), cover the hole with adhesive tape.

ENG-17

Image 18

Contents SV-DVD640 Remote Control Overview Contents Safety Instructions Following illustrations represent precautionsAudio Disc Type and CharacteristicsCharacteristics VideoAccessories Front View of the DVD-VCRRear View of the DVD-VCR Timer Recording is programmed or in progress Display IndicatorsInserting Batteries in the Remote Control DVD Deck is active DVD, VCD, CD or Svcd is loadedConnect the coaxial cable as indicated on By means of RF Coaxial CablePlug & Auto Set up AV2 in By means of 21-pin Scart CableTuning Your Television for Setting the Date and TimeSelect Language Setting the Menu LanguageOpen Menu Set menu LanguageSee Presetting the Stations ManuallyInstall option DVD-VCR then searches for the second station and so onClearing a Preset Station 13 To...ThenIf you Then Changing the Preset Station Table Selecting the RF OUT Sound Mode B/G-D/KSame time on the television screen CH21 .. CH36 .. CH69 Setting the DVD-VCR Output ChannelSelecting the Colour Mode Black and WhiteIntelligent Picture Control Press OK or ❿, untilShowView Extend Auto Power off Screen MessagesOn completion, press Return twice to exit the menu Selecting the Cassette Type Repeat PlayProtecting a Recorded Cassette Recording a Programme with Automatic Stop Switch on the televisionRecording a Programme Immediately To stop recording, press onceUp to six programmes can be preset Using the ShowView FeatureBefore presetting your DVD-VCR Check that the date and time are correctModifying ShowView Programming If you wish to ThenYou can check your preset recordings Using the Timer Programming FeatureChecking a Preset Recording Speed Select recording speedsSelecting the Audio Output Mode Cancelling a Preset RecordingAdjusting Picture Alignment Manually Playing a CassettePlaying a Sequence at Variable Speeds Playing a Cassette in Slow MotionPlaying a Sequence Frame by Frame You can play a cassette in slow motionGo To 00000 Stop End SearchIntro Scan Index Skip Search Using the Tape CounterTo cancel an Index search simply press the ❿II or button Tape counterConnecting an RCA Audio/Video Input Cable Using the Assemble Edit FunctionBrand Codes Brand Codes Using the TV Buttons on the Remote ControlRecoding from Another VCR or Camcorder Button FunctionDigital Audio out Jack Choosing a ConnectionVCR out can not watch by this connection OK or ❿ buttonOK or ❿button Setting Up the Language FeaturesWith the unit in Stop mode, press the Menu button Press the ,❷ buttons to select EnglishMPEG-2 Digital Out Setting Up the Audio OptionsDolby Digital Out Dynamic CompressionBlack Level Setting Up the Display OptionsTV Aspect Ntsc Disc OutputThere are up to 8 rating levels on a disc Setting Up the Parental ControlAbout the Change Password Press the OK or ❿ buttonReceiver Connections Special Playback Features Before You BeginIf you are using a 169 TV Adjusting the Aspect Ratio EZ ViewTo play back using aspect ratio DVD If you are using a 43 TVUse the , ❿ buttons to make the desired setup Using the Display FunctionWhen Playing a DVD/CD To make the screen disappear, press the INFO. button againChanging the Camera Angle Using the Angle buttonUsing the Subtitle button DVD disc can contain up to 32 subtitle languagesWhen playing a DVD Using the Audio buttonRepeat Play Selecting the Audio Language Recalling a Marked Scene Using the Mark Function MP3/WMA PlayUsing the Mark Function DVD/VCD Clearing a MarkProgram/Random playback CD-R MP3/WMA discsYour MP3 or WMA files should be ISO 9660 or Joliet format Random Play CD/MP3/WMA Program Play & Random Play Picture CD PlaybackProgram Play CD/MP3/WMA Return to the Album ScreenCD-R Jpeg Discs DivX/XviD/MPEG4 Special Playback Features Press the button once to stop playbackZoom MPEG4 Supported DivX/XviD/MPEG4 Feature TableDivX/XviD/MPEG4 Playback MPEGs containing DivX can be divided into Video and AudioInput Technical SpecificationsGeneral OutputProblems and Solutions VCR Problem Explanation/SolutionTroubleshooting Guide DVD Before requesting service troubleshootingProblem Action Ellas Greece ZhmivaapovÚ se autovto proiovn pou proevrcetai