Samsung SV-DVD640 manual Recoding from Another VCR or Camcorder, Brand Codes Brand Codes

Page 28

Recoding from Another VCR or Camcorder

You can copy a cassette to your DVD-VCR from another video source, such as another VCR or a camcorder.

☛It is an infringement of copyright laws to copy prerecorded cassettes or to re-record them in any form without the permission of the owners of the corresponding copyright.

1Connect the DVD-VCR, from which the cassette is to be copied, to the appropriate SCART audio and video input connectors on the rear of your DVD-VCR, as indicated on page 8.

2Insert a blank cassette in your DVD-VCR.

3Insert the pre-recorded cassette in the other video source (VCR or camcorder).

4Press the INPUT SEL. button to select the appropriate input on your DVD-VCR:

◆AV1, AV2 for the SCART input

◆AUX for the RCA input

5Start playing back the cassette to be copied.

6Hold REC (●) down for a while to start recording on your DVD-VCR.

7When you have finished recording, press ■ on both VCR and DVD-VCR.

➢If you wish to view the cassette being copied:

◆Your DVD-VCR must be connected as usual to the television (see page 6 for further details).

Using the TV Buttons on the Remote Control

Your DVD-VCR remote control will work with Samsung televisions and compatible brands.

To determine whether your television is compatible, follow the instructions below.

1Switch your television on.

2Point the remote control towards the television.

3Hold down the TV button and enter the two-figure code corresponding to the brand of your television, by pressing the appropriate numeric buttons.

Brand Codes Brand Codes

SAMSUNG

01 to 06

PHILIPS

02,

20, 22

AKAI

09, 23

SABA

13, 14, 22 to 24

GRUNDIG

09, 17, 21

SONY

15,

16

LOEWE

02

THOMSON 13,

14, 24

PANASONIC 08, 23 to 27 TOSHIBA 07, 16 to 19, 21

Result: If your television is compatible with the remote control, it will switch off. It is now programmed to operate with the remote control.

‚➢ If several codes are indicated for your television brand, try each one in turn until you find one that works.

☛When you change the batteries in the remote control, you must reprogramme the code, following the same procedure.

You can then control the television using the following buttons.

Button

Function

STANDBY/ON

Used to switch the television and

 

DVD-VCR on and off.

TV or VCR

Used to switch between the TV and

 

VCR modes.

 

 

INPUT SEL.

Used to select an external source.

 

 

VOL + or –

Used to adjust the volume of the

 

television.

 

 

PROG/TRK

Used to select the required

( or )

programme.

 

 

TV MUTE

Used to mute the volume of the

 

television.

➢The various functions will not necessarily work on all televisions. If you encounter problems, operate the television directly.

ENG-27

Page 27 Page 29
Image 28
Page 27 Page 29
Contents SV-DVD640 Remote Control Overview Contents Safety Instructions Following illustrations represent precautionsDisc Type and Characteristics CharacteristicsAudio VideoFront View of the DVD-VCR AccessoriesRear View of the DVD-VCR Display Indicators Inserting Batteries in the Remote ControlTimer Recording is programmed or in progress DVD Deck is active DVD, VCD, CD or Svcd is loadedConnect the coaxial cable as indicated on By means of RF Coaxial CablePlug & Auto Set up AV2 in By means of 21-pin Scart CableTuning Your Television for Setting the Date and TimeSetting the Menu Language Open MenuSelect Language Set menu LanguagePresetting the Stations Manually Install optionSee DVD-VCR then searches for the second station and so on13 To...Then Clearing a Preset StationIf you Then Selecting the RF OUT Sound Mode B/G-D/K Changing the Preset Station TableSame time on the television screen Setting the DVD-VCR Output Channel Selecting the Colour ModeCH21 .. CH36 .. CH69 Black and WhiteIntelligent Picture Control Press OK or ❿, untilScreen Messages ShowView Extend Auto Power offOn completion, press Return twice to exit the menu Repeat Play Selecting the Cassette TypeProtecting a Recorded Cassette Switch on the television Recording a Programme ImmediatelyRecording a Programme with Automatic Stop To stop recording, press onceUsing the ShowView Feature Before presetting your DVD-VCRUp to six programmes can be preset Check that the date and time are correctModifying ShowView Programming If you wish to ThenUsing the Timer Programming Feature Checking a Preset RecordingYou can check your preset recordings Speed Select recording speedsCancelling a Preset Recording Adjusting Picture Alignment ManuallySelecting the Audio Output Mode Playing a CassettePlaying a Cassette in Slow Motion Playing a Sequence Frame by FramePlaying a Sequence at Variable Speeds You can play a cassette in slow motionEnd Search Go To 00000 StopIntro Scan Using the Tape Counter To cancel an Index search simply press the ❿II or buttonIndex Skip Search Tape counterConnecting an RCA Audio/Video Input Cable Using the Assemble Edit FunctionUsing the TV Buttons on the Remote Control Recoding from Another VCR or CamcorderBrand Codes Brand Codes Button FunctionChoosing a Connection VCR out can not watch by this connectionDigital Audio out Jack OK or ❿ buttonSetting Up the Language Features With the unit in Stop mode, press the Menu buttonOK or ❿button Press the ,❷ buttons to select EnglishSetting Up the Audio Options Dolby Digital OutMPEG-2 Digital Out Dynamic CompressionSetting Up the Display Options TV AspectBlack Level Ntsc Disc OutputSetting Up the Parental Control About the Change PasswordThere are up to 8 rating levels on a disc Press the OK or ❿ buttonReceiver Connections Special Playback Features Before You BeginAdjusting the Aspect Ratio EZ View To play back using aspect ratio DVDIf you are using a 169 TV If you are using a 43 TVUsing the Display Function When Playing a DVD/CDUse the , ❿ buttons to make the desired setup To make the screen disappear, press the INFO. button againUsing the Angle button Using the Subtitle buttonChanging the Camera Angle DVD disc can contain up to 32 subtitle languagesUsing the Audio button When playing a DVDRepeat Play Selecting the Audio Language Using the Mark Function MP3/WMA Play Using the Mark Function DVD/VCDRecalling a Marked Scene Clearing a MarkCD-R MP3/WMA discs Program/Random playbackYour MP3 or WMA files should be ISO 9660 or Joliet format Program Play & Random Play Picture CD Playback Program Play CD/MP3/WMARandom Play CD/MP3/WMA Return to the Album ScreenCD-R Jpeg Discs Press the button once to stop playback DivX/XviD/MPEG4 Special Playback FeaturesZoom DivX/XviD/MPEG4 Feature Table DivX/XviD/MPEG4 PlaybackMPEG4 Supported MPEGs containing DivX can be divided into Video and AudioTechnical Specifications GeneralInput OutputProblems and Solutions VCR Problem Explanation/SolutionBefore requesting service troubleshooting Troubleshooting Guide DVDProblem Action Ellas Greece ZhmivaapovÚ se autovto proiovn pou proevrcetai
Top Page Image Contents