Samsung SV-DVD640 manual Using the Timer Programming Feature, Checking a Preset Recording

Page 22

Using the Timer Programming Feature

The Timer Programming feature allows you to preset the DVD-VCR to record a programme up to one month before that programme is to be broadcast. Up to six programmes can be preset.

☛Before presetting a recording, check that the date and time are correct.

1Insert the cassette and press TIMER on the remote control.

Result: The Timer Method is displayed.

Timer Method

Standard

ShowView

2Press the OK button to select Standard option. Result: The TIMER PROGRAMMING menu is

displayed.

3Press ❿ to select the input source.

4 Select the required station by pressing the ,❷ buttons or INPUT SEL. to select the AV1, AV2 or AUX input sources.

5Press ❿ to select the recording day.

6 Select the required day by pressing the or❷ buttons.

7Press ❿ to select the recording start time.

8Select the required hour value by pressing the or❷ buttons.

9Press ❿ to select the minutes.

10Select the required minute value by pressing the or❷ buttons.

11Press ❿ to select the recording stop time.

12Select the required recording stop time by pressing

the or❷ buttons, following the same procedure as when selecting the recording start time.

13Press ❿ to select the recording speed.

14

Press the

or❷ buttons to select the SP

 

(Standard Play), LP (Long Play), Auto (Auto Tape

 

speed Select) recording speeds.

15

Press the

or❷ buttons to toggle between the

PDC mode (marked On) and the non PDC mode (marked Off).

16When you have finished, press the RETURN button.

17Press the STANDBY/ON button to activate the timer. Result: Before starting recording, the DVD-VCR

compares the timer duration with the remaining time on the cassette.

➢Auto Tape Speed select. The DVD-VCR’s “Auto Tape Speed select” function compares the duration of the timer recording to the actual recording time remaining on the tape loaded. If there is insufficient tape to complete a timer recording in AUTO mode, the DVD-VCR automatically switches to LP mode to record the whole programme.

Checking a Preset Recording

You can check your preset recordings:

◆When you have finished presetting the DVD-VCR

◆If you have forgotten which programmes will be recorded

1Press TIMER on the remote control. Result: The Timer Method is displayed.

2Press the OK button to select Standard option. Result: The TIMER PROGRAMMING menu is

displayed.

3 Press the or❷ buttons to select the required programme.

4Press the ➛ or ❿ buttons to select and change any values as required. For more details, refer to the previous page.

5On completion, press RETURN twice.

ENG-21

Page 21 Page 23
Image 22
Page 21 Page 23
Contents SV-DVD640 Remote Control Overview Contents Safety Instructions Following illustrations represent precautionsAudio Disc Type and CharacteristicsCharacteristics VideoFront View of the DVD-VCR AccessoriesRear View of the DVD-VCR Timer Recording is programmed or in progress Display IndicatorsInserting Batteries in the Remote Control DVD Deck is active DVD, VCD, CD or Svcd is loadedConnect the coaxial cable as indicated on By means of RF Coaxial CablePlug & Auto Set up AV2 in By means of 21-pin Scart CableTuning Your Television for Setting the Date and TimeSelect Language Setting the Menu LanguageOpen Menu Set menu LanguageSee Presetting the Stations ManuallyInstall option DVD-VCR then searches for the second station and so on13 To...Then Clearing a Preset StationIf you Then Selecting the RF OUT Sound Mode B/G-D/K Changing the Preset Station TableSame time on the television screen CH21 .. CH36 .. CH69 Setting the DVD-VCR Output ChannelSelecting the Colour Mode Black and WhiteIntelligent Picture Control Press OK or ❿, untilScreen Messages ShowView Extend Auto Power offOn completion, press Return twice to exit the menu Repeat Play Selecting the Cassette TypeProtecting a Recorded Cassette Recording a Programme with Automatic Stop Switch on the televisionRecording a Programme Immediately To stop recording, press onceUp to six programmes can be preset Using the ShowView FeatureBefore presetting your DVD-VCR Check that the date and time are correctModifying ShowView Programming If you wish to ThenYou can check your preset recordings Using the Timer Programming FeatureChecking a Preset Recording Speed Select recording speedsSelecting the Audio Output Mode Cancelling a Preset RecordingAdjusting Picture Alignment Manually Playing a CassettePlaying a Sequence at Variable Speeds Playing a Cassette in Slow MotionPlaying a Sequence Frame by Frame You can play a cassette in slow motionEnd Search Go To 00000 StopIntro Scan Index Skip Search Using the Tape CounterTo cancel an Index search simply press the ❿II or button Tape counterConnecting an RCA Audio/Video Input Cable Using the Assemble Edit FunctionBrand Codes Brand Codes Using the TV Buttons on the Remote ControlRecoding from Another VCR or Camcorder Button FunctionDigital Audio out Jack Choosing a ConnectionVCR out can not watch by this connection OK or ❿ buttonOK or ❿button Setting Up the Language FeaturesWith the unit in Stop mode, press the Menu button Press the ,❷ buttons to select EnglishMPEG-2 Digital Out Setting Up the Audio OptionsDolby Digital Out Dynamic CompressionBlack Level Setting Up the Display OptionsTV Aspect Ntsc Disc OutputThere are up to 8 rating levels on a disc Setting Up the Parental ControlAbout the Change Password Press the OK or ❿ buttonReceiver Connections Special Playback Features Before You BeginIf you are using a 169 TV Adjusting the Aspect Ratio EZ ViewTo play back using aspect ratio DVD If you are using a 43 TVUse the , ❿ buttons to make the desired setup Using the Display FunctionWhen Playing a DVD/CD To make the screen disappear, press the INFO. button againChanging the Camera Angle Using the Angle buttonUsing the Subtitle button DVD disc can contain up to 32 subtitle languagesUsing the Audio button When playing a DVDRepeat Play Selecting the Audio Language Recalling a Marked Scene Using the Mark Function MP3/WMA PlayUsing the Mark Function DVD/VCD Clearing a MarkCD-R MP3/WMA discs Program/Random playbackYour MP3 or WMA files should be ISO 9660 or Joliet format Random Play CD/MP3/WMA Program Play & Random Play Picture CD PlaybackProgram Play CD/MP3/WMA Return to the Album ScreenCD-R Jpeg Discs Press the button once to stop playback DivX/XviD/MPEG4 Special Playback FeaturesZoom MPEG4 Supported DivX/XviD/MPEG4 Feature TableDivX/XviD/MPEG4 Playback MPEGs containing DivX can be divided into Video and AudioInput Technical SpecificationsGeneral OutputProblems and Solutions VCR Problem Explanation/SolutionBefore requesting service troubleshooting Troubleshooting Guide DVDProblem Action Ellas Greece ZhmivaapovÚ se autovto proiovn pou proevrcetai
Top Page Image Contents