O P E R AT I O N
Storing Channels in Memory (Automatic Method)
1
First, select the correct signal source (ANT, STD, HRC, IRC). See steps 1~4 on previous page.
Press MENU, then press CH ▼ twice to select “Channel.”
Press VOL + to access the Channel
2
Press CH ▼ to select “Auto program”.
3
Press VOL +. The TV will begin memorizing all of the available channels.
4
After all the available channels are stored, the Auto program menu reappears. Press MENU twice to exit.
▼ The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes.
Press MENU at any time to interrupt the memorization process and return to the Channel menu.
CHAPTER THREE: TV OPERATION 3.6