Samsung CL-29A5P, CL-29A5W, CL-29A6P, CL-29A6W, CL-29A7P, CL-29A7W, CL-29M6P, CL-29M6W, CL-34M9P

Page 19

I N S T A L L AT I O N

Connecting a Second VCR to Record from the TV

Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do this, connect your second VCR as follows:

1

Connect a set of audio cables between the AUDIO OUT jacks on the TV and the AUDIO IN jacks on the VCR.

(The VCR input jacks might be either on the front or on back of the VCR.)

2

Connect a video cable between the VIDEO OUT jack on the TV and the VIDEO IN jack on the VCR.

Refer to your VCR’s instructions for more information about how to record using this kind of connection.

Connecting a DVD Player

The rear panel jacks on your TV make it easy to connect a DVD player to your TV.

1

Connect a set of audio cables between the AUDIO INPUT 2 jacks on the TV and the AUDIO OUT jacks on the DVD player.

2

Connect a video cable between the DVD-IN (Y, Pb, Pr) jacks on the TV and the DVD-OUT (Y, Pb, Pr) jacks on the DVD player.

To enable DVD viewing, connect video cables between the Y, Pb and Pr inputs on the TV and Y,Pb and Pr out- puts on the DVD player.

Note: For an explanation of Component video, see your DVD player's owner's manual.

CHAPTER TWO: INSTALLATION 2.7

Image 19

Contents Importer AA68-01186CENGRisk of Electric Shock N O T Open Thank You for Choosing Samsung Example Antenna Grounding Your New TV InstallationOperation Troubleshooting Special FeaturesChapter One List of FeaturesFamiliarizing Yourself with The TV Audio Input jacks Video Input jack Side Panel Jacks´ Video Input jack ¨ Headphone jack AUDIO-VIDEO Monitor Output jacks Rear Panel JacksVideo Input jack ¨ Super Video Input jack DVD Video Input jacksSize Remote Control´ Number buttons +100Press to fast forward a tape Remote Control ˜ VCR controlsPIP Controls Press to play the tapeAntennas with 300-ohm Flat Twin Leads Connecting VHF and UHF AntennasCable without a Cable Box Connecting Cable TVAntennas with 75-ohm Round Leads Separate VHF and UHF AntennasConnecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All ChannelsConnect this cable to a two-way splitter Unplug the cable or antenna from the back of the TV Connecting a VCRInstall AT I O N Connecting an S-VHS VCR Make sure the jacks you are using are underneath the numberConnecting a Second VCR to Record from the TV Connecting a DVD PlayerConnecting a Camcorder Installing Batteries in the Remote Control Press Power Plug & Play FeatureTurning the TV On and Off Press Menu button If you want to reset this featureViewing the Menus Viewing the Menus and On-Screen DisplaysViewing the Display Press Menu to display the menu Selecting a Menu LanguageMemorizing the Channels Selecting the Video Signal-sourcePress MENU, then press CH twice to select Channel Storing Channels in Memory Automatic MethodPress Menu Press CH or CH to select Select Adding and Erasing Channels Manual MethodPress MENU, then pess CH twice to select Channel Press CH or CH to select Add/Erase Press VOL+Changing Channels Adjusting the VolumeZ,*, blank,0,1,...9 Labeling the ChannelsPress the Menu button to display the on-screen menu Setting the ClockPress the CH or CH button to select the correct minutes Press Menu to display menu Customizing the PicturePress Menu four times to exit Using Automatic Picture Settings Customizing the Sound Using Automatic Sound Settings VOL+ Setting The On/Off MelodyViewing a VCR or Camcorder Tape Setting Up Your Remote Control to Operate Your VCR Customizing Your Remote ControlTurn off your VCR On your Samsung remote control, press SET VCR Codes Cable Box Setting Up Your Remote Control to Operate Your Cable BoxCodes Fine Tuning Channels Digital Noise Reduction Press the Menu button to display the menu LNA Low Noise AmplifierTilt Changing the Screen Size Using the R.Surf Press CH or CH to select the appropriate minutes Setting the On/Off TimerWhen finished, press Setting the Sleep TimerPress the Sleep button on the remote control Choosing a Multi-Channel Sound MTS Soundtrack Sound FeaturesPress VOL + to select On Press Menu twice to exit SurroundViewing Closed Captions Press CH to highlight ModePress VOL+ to open Caption menu Changing the Size of the PIP Window Selecting a Signal Source External A/V for PIPViewing Picture-in-Picture Activating Picture-in-PictureChanging the Location Rotating the PIP Window Swapping the Contents of the PIP image and Main imageChanging the PIP Channel Ready window will be displayed Enjoying GamesViewing the Demonstration Chapter Five Identifying ProblemsUsing Your TV in Another Country Cleaning and Maintaining Your TVSpecifications