O P E R AT I O N
Labeling the Channels
Use this feature to assign an
1
Press CH ▲ or CH ▼ to tune to the channel that will be labeled.
2
Press MENU to display the menu.
Press CH ▼ twice to select “Channel”.
Press VOL +.
3
Press CH ▼ five times to select “Labeling”.
Press VOL + to begin labeling. The
(Each label has four fields. See top paragraph.)
4
Press the CH ▲ or CH ▼ but- ton to select a letter, anumber, “*”, or a blank. (Pressing CH ▲ results in this sequence:
A,B,...Z,*, blank,0,1,...9).
5
Press VOL+ to switch to the next field, which will be high- light. Select a second letter or digit using the CH ▲ and CH ▼ buttons, as above.
Repeat the process to select the last two digits.
Press MENU twice to set the label and clear the menus from the screen.
▼ | Note: You cannot select |
“Labeling” in the A/V mode.
3.9 CHAPTER THREE: TV OPERATION