Samsung CL-29A5P, CL-29A5W, CL-29A6P, CL-29A6W, CL-29A7P, CL-29A7W, CL-29M6P, CL-29M6W, CL-34M9P

Page 26

O P E R AT I O N

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH ▲ and CH ▼ buttons to scan through the channels. This eliminates the need to change chan- nels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).

1

Press MENU to display the menu.

2

Press CH ▼ two times to select “Channel.”

3

Press VOL +.

The first line of the menu is selected.

4

Repeatedly press VOL + to cycle through these choices:

ANT (antenna) STD, HRC or IRC (all cable TV).

Note: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area.

At this point the signal source has been selected. Proceed to “Storing

Channels in Memory” (next page).

3.5 CHAPTER THREE: TV OPERATION

Image 26

Contents AA68-01186CENG ImporterRisk of Electric Shock N O T Open Thank You for Choosing Samsung Example Antenna Grounding Operation InstallationYour New TV Special Features TroubleshootingList of Features Chapter OneFamiliarizing Yourself with The TV ´ Video Input jack ¨ Headphone jack Side Panel JacksAudio Input jacks Video Input jack DVD Video Input jacks Rear Panel JacksVideo Input jack ¨ Super Video Input jack AUDIO-VIDEO Monitor Output jacks+100 Remote Control´ Number buttons SizePress to play the tape Remote Control ˜ VCR controlsPIP Controls Press to fast forward a tapeConnecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin LeadsSeparate VHF and UHF Antennas Connecting Cable TVAntennas with 75-ohm Round Leads Cable without a Cable BoxConnect this cable to a two-way splitter Connecting to a Cable Box that Descrambles All ChannelsConnecting to a Cable Box that Descrambles Some Channels Connecting a VCR Unplug the cable or antenna from the back of the TVInstall AT I O N Make sure the jacks you are using are underneath the number Connecting an S-VHS VCRConnecting a DVD Player Connecting a Second VCR to Record from the TVConnecting a Camcorder Installing Batteries in the Remote Control Turning the TV On and Off Plug & Play FeaturePress Power If you want to reset this feature Press Menu buttonViewing the Display Viewing the Menus and On-Screen DisplaysViewing the Menus Selecting a Menu Language Press Menu to display the menuSelecting the Video Signal-source Memorizing the ChannelsStoring Channels in Memory Automatic Method Press MENU, then press CH twice to select ChannelPress CH or CH to select Add/Erase Press VOL+ Adding and Erasing Channels Manual MethodPress MENU, then pess CH twice to select Channel Press Menu Press CH or CH to select SelectAdjusting the Volume Changing ChannelsLabeling the Channels Z,*, blank,0,1,...9Press the CH or CH button to select the correct minutes Setting the ClockPress the Menu button to display the on-screen menu Press Menu four times to exit Customizing the PicturePress Menu to display menu Using Automatic Picture Settings Customizing the Sound Using Automatic Sound Settings Setting The On/Off Melody VOL+Viewing a VCR or Camcorder Tape Turn off your VCR On your Samsung remote control, press SET Customizing Your Remote ControlSetting Up Your Remote Control to Operate Your VCR VCR Codes Codes Setting Up Your Remote Control to Operate Your Cable BoxCable Box Fine Tuning Channels Digital Noise Reduction LNA Low Noise Amplifier Press the Menu button to display the menuTilt Changing the Screen Size Using the R.Surf Setting the On/Off Timer Press CH or CH to select the appropriate minutesPress the Sleep button on the remote control Setting the Sleep TimerWhen finished, press Sound Features Choosing a Multi-Channel Sound MTS SoundtrackSurround Press VOL + to select On Press Menu twice to exitPress VOL+ to open Caption menu Press CH to highlight ModeViewing Closed Captions Activating Picture-in-Picture Selecting a Signal Source External A/V for PIPViewing Picture-in-Picture Changing the Size of the PIP WindowChanging the PIP Channel Swapping the Contents of the PIP image and Main imageChanging the Location Rotating the PIP Window Enjoying Games Ready window will be displayedViewing the Demonstration Identifying Problems Chapter FiveSpecifications Cleaning and Maintaining Your TVUsing Your TV in Another Country